Offline
saludos y buen dia compañeros del clan les traigo como quitar la cuenta de google
de un blu diamond m (d210l mediante nck box en esta ocacion use la version NCKBox AndroidMTK 1.8.8.8
ir a la pestaña FRP-PATTERN-PRIVACY
irnos a Phone setting
escoger 0-by CPU
despues 6580
y por ultimo precionar (FM) Reset FRP
conectar el celular apagado y con la bateria puesta y en segundos hara el proceso
Exe version: NCKBox AndroidMTK 1.8.8.8
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM86)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x464a32354142
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 150100464A32354142 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM53)
-Reading GPT Drive OK
Checking data, wait...
Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.
de un blu diamond m (d210l mediante nck box en esta ocacion use la version NCKBox AndroidMTK 1.8.8.8
ir a la pestaña FRP-PATTERN-PRIVACY
irnos a Phone setting
escoger 0-by CPU
despues 6580
y por ultimo precionar (FM) Reset FRP
conectar el celular apagado y con la bateria puesta y en segundos hara el proceso
Exe version: NCKBox AndroidMTK 1.8.8.8
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM86)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x464a32354142
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 150100464A32354142 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM53)
-Reading GPT Drive OK
Checking data, wait...
Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.