cuenta de google G928G frp via uart

[servergsm]

frp via uart en Octopus

Android 7.0 Binary 3

-Seleccionamos el modelo G928G para un (s6 Edge +)
-darle en Reset/FRP/Reactivacion
-nos dira que lo pongamos en modo Download
-conectamos con el cable usb normal y luego nos pedira conectar Uart
-yo lo hice con el cable RX-AT170 - SAM C3300K
-oprimen volumen (-) + la tecla Power por 15 seg. y luego Octopus hace el resto.

listo FRP Reset, a Cobrar.....!

Adjunto proceso de Log....
Bienvenido en Octoplus Box Samsung software versión 2.6.6
-----------------------------------------------------------------------------------
To connect SM-G928G phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Plataforma: Samsung Android
Puerto seleccionado: COM9
Modelo seleccionado: SM-G928G
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM9
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.6 Software version.