🔐 Frp Cuenta Google cuenta google Oppo 57 Cph2387 frp hydra tool

[servergsm]

cuenta google Oppo 57 Cph2387 frp hydra tool

1 - cph 2387 test point
2 - hydra no ocupa bateria puesta ,selecionamos mtk modulo , todo yes al hacer execute
3 - preloader-A57_k65v1_64_bsp.bin, lo pide en el segundo yes

Debes estar registrado para ver imágenes adjuntar

Debes estar registrado para ver imágenes adjuntar

Debes estar registrado para ver imágenes adjuntar

Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port (COM5)
Device : /6&236cc9f3&0&6
SymbolicName : \\?\usb#vid_0e8d&pid_0003#6&236cc9f3&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2016,3.0.1504.0
Service : wdm_usb

Openning Port [COM5] Ok
Handshaking...Ok
HwCode : 0766 {MT6765/MT8768t}
Hwver : 0000
Target config : E5
SBC : 01 (True)
SLA : 00 (False)
DAA : 04 (True)
SWJTAG : 04 (True)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 20 (True)
MEMWRITE : 40 (True)
CMD_C8 : 80 (True)
Connection : BROM
HW Subcode : 8A00
HW Subcode : CA00
SW Ver : 0000
ME_ID : BF2CF496A6D9174EF58393B3A9A9D173
SOC_ID : C4DF9F3B8D5382025571F81FD1A89C00DDBC43AA24C6F1685ADD5279264AB510

Exploiting Device...
Successfully Exploited..
Handshaking...Ok
Dumping Preloader from Bootrom..
Seeking preloader address..
Not Found
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM

Preparing Download Agent..[MTK_AllInOne_DA_5.2152.bin]
Patching da2 ... Ok
Uploading Stage 1....
Successfully uploaded stage 1, jumping ..
Executing JUMP_DA Address @ 0x00200000
Jumping to 0x00200000 Ok 0xC0
Successfully received DA sync
ONNECTION_AGENT : brom
DRAM config needed for : 1501004455544234
Sending auto preloader from dump...
Hydra Auto Preloader Search Enabled..
Hydra will find compatible preloader files...
Selected File : D:\DES\preloader-A57_k65v1_64_bsp\preloader-A57_k65v1_64_bsp.bin
Sending EMI Data... [DRAM setup passed.]
Sending emi data succeeded.
Sending emi data succeeded.
Uploading stage 2...
Upload data was accepted. Jumping to stage 2...
Successfully uploaded stage 2
ERAM Size : 0x000000000003A000-232 KB
IRAM Size : 0x0000000100000000-4 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000001000000-16 MB
EMMC USER Size : 0x0000001D1EC00000-116.48 GB
EMMC CID : 15010044555442343202B50952BC795D - DUTB42
HW-CODE : 0x766
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCA00
SW-VERSION : 0x0
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : high-speed
Upload data was accepted. Jumping to stage 2...
DA Extensions successfully added
Reading Partition Table ..
Partition Count : 57
--------------- Reading build.prop content ---------------
Unable to read system info..
--------------- end of build.prop content ---------------

Reading IMEI........
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Backing up Security..
- preloader(preloader.bin), 512 KB = Ok [preloader_k65v1_64_bsp.bin]
*Creating Scatter file... C:\Hydra Tool\Backup\MTKBKUP766_BF2CF496A6D9174EF58393B3A9A9D173\Auto52723024231\6765_Android_scatter.txt
- pgpt(pgpt.bin), 32 KB = Ok
- nvram(nvram.bin), 64 MB = Ok
- nvdata(nvdata.bin), 64 MB = Ok
- frp(frp.bin), 1024 KB = Ok
- protect1(protect1.bin), 8 MB = Ok
- protect2(protect2.bin), 9.867 MB = Ok
- persist(persist.bin), 48 MB = Ok
- proinfo(proinfo.bin), 3 MB = Ok
- nvcfg(nvcfg.bin), 32 MB = Ok
- sec1(sec1.bin), 2 MB = Ok
- seccfg(seccfg.bin), 8 MB = Ok
Backup Done!!!
------------------------------
Removing FRP Flash Mode..
------------------------------
Operation : Uni_FMFRP_Erase
Status: Ok
Rebooting Device...
Reboot Option : RebootToNormal
Rebooting Operation Done!!!!