Online
1- Abrimos el modulo MTK
2- Seleccionamos el modelo en la pestaña Unlocking
3- Seleccionamos "Flash Mode" OJO en esta opcion no es necesarion el Root
Solo queda en darle Direct Unlock conectamos al mismo tiempo bateria y cable
No toma ni 1 minuto en quedar libre
A cobrar y ser Feliz
Abajo el Log
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.9.1
Selected model: OT-4015A
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004E35585A4D42 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM43)
MODEL FROM PROINFO: 4015A-2AQBMX1
SECRO FROM PROINFO: x6c0w50kan10
OTP IMEI: 00000000
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:8) Code : 111111111
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 11111111
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[2660]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.
2- Seleccionamos el modelo en la pestaña Unlocking
3- Seleccionamos "Flash Mode" OJO en esta opcion no es necesarion el Root
Solo queda en darle Direct Unlock conectamos al mismo tiempo bateria y cable
No toma ni 1 minuto en quedar libre
A cobrar y ser Feliz
Abajo el Log
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.9.1
Selected model: OT-4015A
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e35585a4d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004E35585A4D42 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM43)
MODEL FROM PROINFO: 4015A-2AQBMX1
SECRO FROM PROINFO: x6c0w50kan10
OTP IMEI: 00000000
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:8) Code : 111111111
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 11111111
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[2660]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.