Admin
En línea
- Marca 📱
- Oppo / Vivo / Realme
- Modelo 🔖
- Oppo A58 cph2577
- 📱 Android / Sistema operativo
- Android 15
- Tipo de falla / servicio 🛠️
- FRP / Desbloqueos (cuentas, IMEI, red)
- 🔧Herramienta utilizada
- pandora | Pandora Box
- Estado del equipo 📋
- Kg MDM payout otros Bloqueo
- ¿Problema resuelto?
- si | ✅ Resuelto
Debes estar registrado para ver imágenes adjuntar
Dispositivo bloqueado
Este dispositivo se encuentra en modo bloqueo de seguridad, con la opción Llamar para bloquear activada.
Contactar a Servicio al cliente
Llame a Servicio al cliente al 8000626851 para desbloquear este dispositivo.
Tienes que hacer Test Point el que esta en este video
video
Debes estar registrado para ver el Video O el Medio
solda un alambre esmaldtado con para que hagas tespoint en cualquier base de la lamina
en pandora selecionar el modelo exacto en el la imagen
Debes estar registrado para ver imágenes adjuntar
Luego de selecionar el modelo da en Reset Accoint Y has testpoint espera a que termine el telefono encedera ojo tien eque desoldar el test point Nota tambien silve para FRP
una recomendacion es bueno desactivar las actualizaciones para que no se bloque simple vaya a service en pandora click en
Debes estar registrado para ver imágenes adjuntar
y haga test point resultado
Debes estar registrado para ver imágenes adjuntar
Código:
Selected model: OPPO CPH2577 (Oppo A58 4G)
Operation: Disable OTA Update
Software version: 9.25
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM115 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM115 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xA38E03AC, 0x7A888316, 0xFDA4CD36, 0xFA489188
Get Chip ID... [MT6768]
Get SOC ID... [5321E164E1C08FB3C82BC4B84FC941228442027FA262F7FAEEAD90E146763AAA]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E47324D323132202F2F40E79AF5
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G2M212
EMMC_ID : 0x13014E47324D323132202F2F40E79AF5
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2577
Product Name : CPH2577EEA
Product Device : OP574FL1
Product Board : k69v1_64
Board Platform : mt6768
Market Name : OPPO A58
Build ID : AP3A.240617.008
Build Date : Mon Aug 4 11:45:44 CST 2025
Display ID : CPH2577_15.0.0.1201(EX01)
Security Patch : 2025-08-01
Version SDK : 35
Version Release : 15
Version Codename : REL
Firmware Version : T.R4T2.1f099a8-39f7e
Userdata FS Type : F2FS
Disable OTA...
Exception: Division by zero
