Offline
si no lo reconoce, solo conecten el cable y saquen la bateria, asi lo reconoce sin problemas, al menos en mi caso así fue..
Exe version: NCKDongle AndroidMTK 2.6.1
Selected model: 0-By CPU ELBRUS
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM4)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (115Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 24:00:00:00:00:00:00:00
EMMC CID: 880103443944313647 : 00000000000000
EMMC UA SIZE: 0x39d000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x39dc00000 [14.465 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM5)
IMEI[1]: 3545251
IMEI[2]: 3545251
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 12345566
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:3) Code : 12345566
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[2060]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.
Exe version: NCKDongle AndroidMTK 2.6.1
Selected model: 0-By CPU ELBRUS
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM4)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (115Gb+8192Mb) UNKNOWN_EMMC_DEVICE
EMMC FW VERSION: 24:00:00:00:00:00:00:00
EMMC CID: 880103443944313647 : 00000000000000
EMMC UA SIZE: 0x39d000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x39dc00000 [14.465 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM5)
IMEI[1]: 3545251
IMEI[2]: 3545251
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 12345566
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:3) Code : 12345566
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[2060]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.
