Offline
cuenta google A10s (a107m frp bit 5 u5 bin5 Binary 5 binario 5 rev5 con umt
ejecutar el modulo de la umt mtk v4.4 ir ala pestaña mtk en un clip f alli seleccionas read inf y reset frp alli ejecutas....con el cel apagado con los 2 botones de volumen presionados alli hara la conexion con el bromm y done agradecer no cuesta nada amigos!!
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM16
Port Name: MediaTek PreLoader USB VCOM (Android) (COM16)
Path: \\?\usb#vid_0e8d&pid_2000#5&345b95e6&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM24
Port Name: MediaTek USB Port (COM24)
Path: \\?\usb#vid_0e8d&pid_0003#5&345b95e6&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_s96116ca1_210725_081238.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM24)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Thu Dec 17 03:46:16 KST 2020
Build Flavor : a10sub-user
Build Desc. : a10sub-user 10 QP1A.190711.020 A107MUBU5BTL3 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020.A107MUBU5BTL3
Patch Level : 2020-12-01
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
- Resetting FRP[2]...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
ejecutar el modulo de la umt mtk v4.4 ir ala pestaña mtk en un clip f alli seleccionas read inf y reset frp alli ejecutas....con el cel apagado con los 2 botones de volumen presionados alli hara la conexion con el bromm y done agradecer no cuesta nada amigos!!
Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM16
Port Name: MediaTek PreLoader USB VCOM (Android) (COM16)
Path: \\?\usb#vid_0e8d&pid_2000#5&345b95e6&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM24
Port Name: MediaTek USB Port (COM24)
Path: \\?\usb#vid_0e8d&pid_0003#5&345b95e6&0&6#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0766, [MT6765]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
Disable Auth Success
Preloader saved as : preloader_s96116ca1_210725_081238.bin
DA : MTK_AllInOne_DA.bin
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM24)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Build Date : Thu Dec 17 03:46:16 KST 2020
Build Flavor : a10sub-user
Build Desc. : a10sub-user 10 QP1A.190711.020 A107MUBU5BTL3 release-keys
Android Ver. : 10
Display ID : QP1A.190711.020.A107MUBU5BTL3
Patch Level : 2020-12-01
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Platform : MT6765
Board : S96116CA1
Platform : mt6765
Userdata is NOT ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
- Resetting FRP[2]...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.4]
