Offline
Yo no encontré solución con alguna box igual si ya esta pueden borrarlo.
1. Con box Furious en OTSmart V1.0.0.1544
2. Seleccionar modelo ZTE B816 Boost .
3. Marcar casilla FRP Reset.
4. Conectar equipo apagado y esperar a que haga el proceso, reiniciar y ya sin cuenta.
Aqui el log de operacion;
Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM50))
Preparing to start flash mode;
Preparing to open COM50
Connecting;
Downloading DA;
Initializing;
Rid: a367d4d3c5a2f88f818295d4b44cbd20
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;
Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;
DA_HIGHSPEED_VCOM (@oem251.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM46;
DEVICE INFO:
BB CHIP: MT6735M_S00 [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0xD2540705 0xC17358A8 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-80-000000-0
PROVIDER: N/A
USRDATA INFO: 0x99000000 SIZE: 0x39C00000
Factory Reset Protection successfully removed !
Time needed - 00:00:00
Log file saved to: LOG_25_04_2017_13_24_05.txt
1. Con box Furious en OTSmart V1.0.0.1544
2. Seleccionar modelo ZTE B816 Boost .
3. Marcar casilla FRP Reset.
4. Conectar equipo apagado y esperar a que haga el proceso, reiniciar y ya sin cuenta.
Aqui el log de operacion;
Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM50))
Preparing to start flash mode;
Preparing to open COM50
Connecting;
Downloading DA;
Initializing;
Rid: a367d4d3c5a2f88f818295d4b44cbd20
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;
Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;
DA_HIGHSPEED_VCOM (@oem251.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM46;
DEVICE INFO:
BB CHIP: MT6735M_S00 [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0xD2540705 0xC17358A8 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-80-000000-0
PROVIDER: N/A
USRDATA INFO: 0x99000000 SIZE: 0x39C00000
Factory Reset Protection successfully removed !
Time needed - 00:00:00
Log file saved to: LOG_25_04_2017_13_24_05.txt
