Online
Fabricante: BLU (Bold Like Us)
Modelo: M6 (S730P | 23)
FCC ID: YHLBLUSTUDIOMEG
IMEI1 (Hardware): XXXXXXXXXXXXXXX
IMEI1 (Software): XXXXXXXXXXXXXXX
IMEI2 (Hardware): XXXXXXXXXXXXXXX
IMEI2 (Software): XXXXXXXXXXXXXXX
Serial Number: XXXXXXXXXXXXXXXX
Versión de Android: 7 (Nougat)
Nivel de parche de seguridad de Android: 5 de julio de 2017
Versión de la Banda Base: S6061C_G4_W12458_N_MP_V0.1.0_S170607,
2017/06/07 18:199
Número de compilación: NRD90M
Versión de compilación personalizada: BLU_S730P_V7.0.03.01_GENERIC 12-07-2017 17:06
Estado: dispositivo con bloqueo por FRP.
Solución: NCKDongle AndroidMTK v2.6.1.0
1- Leer el dispositivo para saber exactamente que es... Read BootInfo.
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: NRD90M
Version: 7.0
Build Date: Wed Jul 12 17:06:23 CST 2017
Model: Studio M6
Brand: BLU
Device: S730
Manufacturer: BLU
Display ID: BLU_S730P_V7.0.03.01_GENERIC
Device: S730
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp2-V1_wtk6580.we.n
This phone have FRP partition.
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Wait untill phone will start charging.
[0]All done.
2- Realizar BackUp al dispositivo ya que cuando revisé en el StockRom esta no la tenía.
Action : Read Firmware.
Selected 0-By CPU:MT6580
Exe version: NCKDongle AndroidMTK 2.6.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: NRD90M
Version: 7.0
Build Date: Wed Jul 12 17:06:23 CST 2017
Model: Studio M6
Brand: BLU
Device: S730
Manufacturer: BLU
Display ID: BLU_S730P_V7.0.03.01_GENERIC
Device: S730
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp2-V1_wtk6580.we.n
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: lk
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: expdb
Partition: frp
Partition: tee1
Partition: tee2
Partition: nvdata
Partition: metadata
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 352239090012434
IMEI[2] from NVRAM: 352239090108430
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing trustzone
Start processing nvdata ......
Reading: BEGIN: 0x5aa0000 - LEN: 0x2000000
Start processing secro secro.img
Reading: BEGIN: 0xa200000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0xa0000000
Saved to: XXXXXXX
[0]All done.
3- Realizar BackUp al Security ITEMS.
Exe version: NCKDongle AndroidMTK 2.6.1
Selected phone: MT6580
Action: Backup security items
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: NRD90M
Version: 7.0
Build Date: Wed Jul 12 17:06:23 CST 2017
Model: Studio M6
Brand: BLU
Device: S730
Manufacturer: BLU
Display ID: BLU_S730P_V7.0.03.01_GENERIC
Device: S730
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp2-V1_wtk6580.we.n
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Dumping security....
Dumping Preloader.
Reading nvram
Dumping frp
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Dumping nvdata
Reading: BEGIN: 0x5aa0000 - LEN: 0x2000000
Dumping secro
Reading: BEGIN: 0xa200000 - LEN: 0x600000
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: lk
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: expdb
Partition: frp
Partition: tee1
Partition: tee2
Partition: nvdata
Partition: metadata
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Saved to: XXXXXXX
Wait untill phone will start charging.
[0]All done.
4- Eliminar FRP.
Exe version: NCKDongle AndroidMTK 2.6.1
Selected model: 0-By CPU MT6580
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Checking data, wait...
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.
Modelo: M6 (S730P | 23)
FCC ID: YHLBLUSTUDIOMEG
IMEI1 (Hardware): XXXXXXXXXXXXXXX
IMEI1 (Software): XXXXXXXXXXXXXXX
IMEI2 (Hardware): XXXXXXXXXXXXXXX
IMEI2 (Software): XXXXXXXXXXXXXXX
Serial Number: XXXXXXXXXXXXXXXX
Versión de Android: 7 (Nougat)
Nivel de parche de seguridad de Android: 5 de julio de 2017
Versión de la Banda Base: S6061C_G4_W12458_N_MP_V0.1.0_S170607,
2017/06/07 18:199
Número de compilación: NRD90M
Versión de compilación personalizada: BLU_S730P_V7.0.03.01_GENERIC 12-07-2017 17:06
Estado: dispositivo con bloqueo por FRP.
Solución: NCKDongle AndroidMTK v2.6.1.0
1- Leer el dispositivo para saber exactamente que es... Read BootInfo.
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: NRD90M
Version: 7.0
Build Date: Wed Jul 12 17:06:23 CST 2017
Model: Studio M6
Brand: BLU
Device: S730
Manufacturer: BLU
Display ID: BLU_S730P_V7.0.03.01_GENERIC
Device: S730
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp2-V1_wtk6580.we.n
This phone have FRP partition.
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Wait untill phone will start charging.
[0]All done.
2- Realizar BackUp al dispositivo ya que cuando revisé en el StockRom esta no la tenía.
Action : Read Firmware.
Selected 0-By CPU:MT6580
Exe version: NCKDongle AndroidMTK 2.6.1
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: NRD90M
Version: 7.0
Build Date: Wed Jul 12 17:06:23 CST 2017
Model: Studio M6
Brand: BLU
Device: S730
Manufacturer: BLU
Display ID: BLU_S730P_V7.0.03.01_GENERIC
Device: S730
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp2-V1_wtk6580.we.n
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: lk
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: expdb
Partition: frp
Partition: tee1
Partition: tee2
Partition: nvdata
Partition: metadata
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 352239090012434
IMEI[2] from NVRAM: 352239090108430
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing frp ......
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Start processing trustzone
Start processing nvdata ......
Reading: BEGIN: 0x5aa0000 - LEN: 0x2000000
Start processing secro secro.img
Reading: BEGIN: 0xa200000 - LEN: 0x600000
Start processing system
Reading: BEGIN: 0xb000000 - LEN: 0xa0000000
Saved to: XXXXXXX
[0]All done.
3- Realizar BackUp al Security ITEMS.
Exe version: NCKDongle AndroidMTK 2.6.1
Selected phone: MT6580
Action: Backup security items
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: NRD90M
Version: 7.0
Build Date: Wed Jul 12 17:06:23 CST 2017
Model: Studio M6
Brand: BLU
Device: S730
Manufacturer: BLU
Display ID: BLU_S730P_V7.0.03.01_GENERIC
Device: S730
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp2-V1_wtk6580.we.n
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Dumping security....
Dumping Preloader.
Reading nvram
Dumping frp
Reading: BEGIN: 0x4fa0000 - LEN: 0x100000
Dumping nvdata
Reading: BEGIN: 0x5aa0000 - LEN: 0x2000000
Dumping secro
Reading: BEGIN: 0xa200000 - LEN: 0x600000
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: seccfg
Partition: lk
Partition: boot
Partition: recovery
Partition: para
Partition: logo
Partition: expdb
Partition: frp
Partition: tee1
Partition: tee2
Partition: nvdata
Partition: metadata
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: system
Partition: cache
Partition: userdata
Partition: flashinfo
Saved to: XXXXXXX
Wait untill phone will start charging.
[0]All done.
4- Eliminar FRP.
Exe version: NCKDongle AndroidMTK 2.6.1
Selected model: 0-By CPU MT6580
[auto]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Checking data, wait...
Writing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
[0]All done.
