🔐 Frp Cuenta Google FRP Cuenta Google A Samsung Galaxy A14 5G (SM-A146U) bit 9 u9 Android 14 Pandora

[servergsm]

Eliminar Cuenta Google FRP A Samsung Galaxy A14 5G (SM-A146U) binario 9 bin 9 b9 Con pandora box Android 14

Aprende a eliminar la cuenta Google (FRP) de tu Samsung Galaxy A14 5G (SM-A146U) en su última versión, Binario 9 (B9) con Android 14. Utilizamos la herramienta profesional Pandora Box para saltar de forma segura y permanente la protección de reestablecimiento de fábrica (FRP). Sigue nuestra guía paso a paso para desbloquear tu dispositivo. ¡Solución 100% efectiva!

Seleccionar lo que está en la image dark clic en borrar FRP y limpiar y conectar apagado presionando las teclas de volumen

🔒 Para ver el contenido, usa la reacción que aparece debajo del post. 👉 Haz clic aquí si no ves las reacciones Me gusta

Selected model: Samsung SM-A146U (Samsung Galaxy A14 5G)
Operation: Erase FRP And Wipe
Software version: 9.13
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM136 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Read Efuse error
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0989
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM191 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xEE753C08, 0x95803EA9, 0xC273FB88, 0x03EA461F
Get Chip ID... [MT6833]
Get SOC ID... [6273F98418AC1FA186711E8A21EBBA32F4ED9E3A16605A6C06A5DBD188807538]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KM5P9001DM-B424 (0002)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
   UFS_CID   : KM5P9001DM-B424
   UFS_FWVER : 0002
   BLOCK_SIZE: 0x0000001000 (4.00Kb)
   UFS_LU0   : 0x0000400000 (4.00Mb)
   UFS_LU1   : 0x0000400000 (4.00Mb)
   UFS_LU2   : 0x0EE5800000 (59.59Gb)
RAM INFO:
   INT_SRAM: 0x0000070000 (448.00Kb)
   EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  10% - 20% device life time used
   DeviceLifeTimeEstB:  10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A146U
Product Name         : a14xmsq
Product Device       : a14xm
Product Board        : a14xm
Board Platform       : mt6833
Build ID             : SP1A.210812.016
Build Date           : Tue Oct  1 02:51:16 KST 2024
Firmware Version     : A146USQS9DXI2
Userdata FS Type     : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A146U%20(Samsung%20Galaxy%20A14%205G)/FRP_BACKUP_(2025-12-15_22-27-50)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Wipe data done!