🔐 Frp Cuenta Google FRP Infinix X665B (Infinix Hot 12i) Cuenta Google pandora box

[servergsm]

Cuenta Google FRP Eliminar A Infinix X665B (Infinix Hot 12i) Con pandora box

Este es un tutorial paso a paso que te guiará en el proceso de eliminar la Cuenta Google (FRP) del dispositivo Infinix X665B (Hot 12i). El método utiliza la herramienta profesional Pandora Box, garantizando una solución efectiva y rápida para desbloquear tu teléfono y recuperar su uso completo. Ideal para técnicos y usuarios con conocimientos básicos de flasheo.
​

🔒 Para ver el contenido, usa la reacción que aparece debajo del post. 👉 Haz clic aquí si no ves las reacciones Me gusta

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V2023 (Android),usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID =  0x2E425F65, 0xC86A3E66, 0x8DF327B3, 0x2DBEF1A4
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth:  enabled
Get device info... OK
EMMC INFO:
   EMMC_CNAME: hC8aP>
   EMMC_ID   : 0x90014A68433861503E03102B9B46C88B
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
   INT_SRAM: 0x000003A600 (233.50Kb)
   EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]:  BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [B]
Read product info... [EXT4] ... OK
Product Brand        : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model        : Infinix X665B
Product Name         : X665B-OP
Product Device       : Infinix-X665B
Product Board        : Infinix-X665B
Board Platform       : mt6761
Build ID             : RP1A.200720.011
Build Date           : Fri Jan 12 11:44:22 CST 2024
Display ID           : INFINIX-R-64-240111V410
Security Patch       : 2024-01-01
Version SDK          : 30
Version Release      : 11
Version Codename     : REL
Firmware Version     : 240111V482
Userdata FS Type     : F2FS
Switch to BROM
Read partition "preloader"... OK
Read partition "preloader_backup"... OK
Parse scatter file... OK
Load Rom Images... OK
Erasing preloaders:
Format "preloader" partition... OK
Format "preloader_backup" partition... OK
Connect Type-C to NONE... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x2E425F65, 0xC86A3E66, 0x8DF327B3, 0x2DBEF1A4
Get Chip ID... [MT6761]
Get SOC ID... [8E921A84A724421733A0800B70262C15D556D3E4004B320AD0C4562AA85FB8E3]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433861503E03102B9B46C88B
Load EMI from file... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: hC8aP>
   EMMC_ID   : 0x90014A68433861503E03102B9B46C88B
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
   INT_SRAM: 0x000003A500 (233.25Kb)
   EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  info not available
   DeviceLifeTimeEstB:  10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Restore parts:
Write file "preloader_x665b_h6222.bin"... OK
Write file "preloader_x665b_h6222_backup.bin"... OK
Read partitions info from phone... OK
Checking A/B state... OK [B]
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X665B%20(Infinix%20Hot%2012i)/FRP_BACKUP_(2025-10-21_15-16-53)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!