Offline
1 - Solo ponemos en modo download
2 - Abrimos octopus (seleccionamos el modelo ls676)
3 - Pestaña android tools (Seleccionamos Reset FRP)
4 - Luego que el telefono encianda (Subira con un bloqueo de pantalla) lo apagamos y hacemos un Hard reset
5 - Y listo (Sin cuenta de google)
Aqui el log;
Bienvenido en Octoplus/Octopus Box LG Software version 2.6.9
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG Qualcomm
Puerto seleccionado: COM20
Modelo seleccionado: LS676
Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)).
Lectura de la información...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.
Performed by 2.6.9 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG Qualcomm
Puerto seleccionado: COM610
Modelo seleccionado: LS676
Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)).
Lectura de la información...
IMEI: 350305-26-00xxxx-4
Android version: 6.0.1
Battery level: 53%
Versión de SW: LS676ZV4
Mode: Emergency
Initializing flash...OK
Versión de SW: LS676ZV5_06
Android version: 6.0.1
LAF Version: 1.1
Product ID: CH33S170406007393
IMEI: 357269-08-60xxxx-0
Target operator: SPR
Hardware: rev_11
Reading partitions...OK
Resetting FRP Lock...¡Error!
Reading partitions...OK
Resetting FRP Lock...
Step 1...OK
Step 2...OK
Step 3...OK
Resetting FRP lock successfully completed!
Performed by 2.6.9 Software version.
2 - Abrimos octopus (seleccionamos el modelo ls676)
3 - Pestaña android tools (Seleccionamos Reset FRP)
4 - Luego que el telefono encianda (Subira con un bloqueo de pantalla) lo apagamos y hacemos un Hard reset
5 - Y listo (Sin cuenta de google)
Aqui el log;
Bienvenido en Octoplus/Octopus Box LG Software version 2.6.9
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG Qualcomm
Puerto seleccionado: COM20
Modelo seleccionado: LS676
Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)).
Lectura de la información...
Initializing ADB...OK
Waiting for phone...
Please, reconnect phone, enable USB debugging, and try again.
To enable USB debugging, please perform the following steps:
1. Disconnect cable
2. Install LG Android ADB drivers
3. Go to "Settings" -> "About phone" -> "Software information"
4. Click on Build number 5 times
5. Enable "Settings" -> "Developer options" -> "USB debugging" option
6. Connect the cable and check, whether ADB interface has appeared in PC Device Manager.
Performed by 2.6.9 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Plataforma: LG Qualcomm
Puerto seleccionado: COM610
Modelo seleccionado: LS676
Please, put the phone into download mode manually (Power phone OFF (reconnect battery), press and hold "Vol+" button and connect the cable (or P999 cable)).
Lectura de la información...
IMEI: 350305-26-00xxxx-4
Android version: 6.0.1
Battery level: 53%
Versión de SW: LS676ZV4
Mode: Emergency
Initializing flash...OK
Versión de SW: LS676ZV5_06
Android version: 6.0.1
LAF Version: 1.1
Product ID: CH33S170406007393
IMEI: 357269-08-60xxxx-0
Target operator: SPR
Hardware: rev_11
Reading partitions...OK
Resetting FRP Lock...¡Error!
Reading partitions...OK
Resetting FRP Lock...
Step 1...OK
Step 2...OK
Step 3...OK
Resetting FRP lock successfully completed!
Performed by 2.6.9 Software version.
Debes estar registrado para ver imágenes adjuntar
