Admin
Online
- Marca 📱
- Oppo / Vivo / Realme
- Modelo 🔖
- Realme RMX3741 (Realme 11 Pro Plus 5G)
- Tipo de falla / servicio 🛠️
- FRP / Desbloqueos (cuentas, IMEI, red)
- Estado del equipo 📋
- Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset
Eliminar Cuenta Google FRP A Realme RMX3741 (Realme 11 Pro Plus 5G) con pandora
Código:
Realme RMX3741 (Realme 11 Pro Plus 5G) done.
Selected model: Realme RMX3741 (Realme 11 Pro Plus 5G)
Operation: Erase FRP And Wipe
Software version: 9.20
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Work ID: 110756143
Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM8 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x3B2CBB49, 0xCC2E303D, 0xE55A8655, 0x940CACFD
Get Chip ID... [MT6877]
Get SOC ID... [19758819A90F60DD8E42838DF9836DE0D0130DE4155E2A9A71 ACE289D137718D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [17]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KLUFG8RHGB-B0E1 (0901)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KLUFG8RHGB-B0E1
UFS_FWVER : 0901
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x772C000000 (476.69Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0300000000 (12.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3741
Product Name : RMX3741RU
Product Device : RE58B6L1
Product Board : k6877v1_64
Board Platform : mt6877
Market Name : realme 11 Pro+ 5G
Build ID : AP3A.240617.008
Build Date : Mon Nov 24 16:56:31 CST 2025
Display ID : RMX3741_15.0.0.1600(EX01)
Security Patch : 2025-12-01
Version SDK : 35
Version Release : 15
Version Codename : REL
Firmware Version : T.2127a74_55dd5
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Realme_RMX3741%20(Realme%2011%20Pro%20Plus%205G)/FRP_BACKUP_(2026-2-20_17-57-40)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Wipe data done!