🔐 Frp Cuenta Google FRP Samsung Galaxy A12 Sm-A125u Bit 9 U9 con Pandora Box

[servergsm]

Marca 📱

Samsung

Modelo 🔖

Samsung Galaxy A12 SM-A125U

📱 Android / Sistema operativo

Android 12

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

pandora | Pandora Box

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

Eliminar Cuenta Google FRP A Samsung Galaxy A12 SM-A125U binario 9 u9 bin 9 con pandora Android 12

se necesita Test Point

FRP ECHO

Debes estar registrado para ver imágenes adjuntar

​

Selected model: Samsung SM-A125U (Samsung Galaxy A12)
Operation: Eliminar FRP
Software version: 9.25

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM20 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM20 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x5E32C69C, 0x7E30F646, 0xA099C6C8, 0x8758B0E6
Get Chip ID... [MT6765]
Get SOC ID... [AA2B4B7426CF1F09E3886B476ACA50A2B49F3477D2687250C55BF5884D033B4F]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445836384D4200DA95DCE9687F
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: DX68MB
   EMMC_ID   : 0x150100445836384D4200DA95DCE9687F
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232.00Kb)
   EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  90% - 100% device life time used
   DeviceLifeTimeEstB:  90% - 100% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... error
Read product info... [EXT4] ... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A125U
Product Name         : a12usq
Product Device       : a12u
Product Board        : a12u
Board Platform       : mt6765
Build ID             : SP1A.210812.016
Build Date           : Tue Oct 29 18:41:00 KST 2024
Display ID           : SP1A.210812.016.A125USQS9CXJ4
Security Patch       : 2024-11-01
Version SDK          : 31
Version Release      : 12
Version Codename     : REL
Firmware Version     : A125USQS9CXJ4
Userdata FS Type     : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Pandora/Backup/MTK/Samsung_SM-A125U%20(Samsung%20Galaxy%20A12)/FRP_BACKUP_(2026-7-17_16-15-51)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!