🔐 Frp Cuenta Google FRP Samsung Galaxy A34 Sm-A346m Bit 6 U6 con Pandora Box (2 usuarios viendo)

[servergsm]

Marca 📱

Samsung

Modelo 🔖

Samsung Galaxy A34 SM-A346M

📱 Android / Sistema operativo

Android 14

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

pandora | Pandora Box

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

Samsung Galaxy A34 SM-A346M Cuenta Google FRP Binario 6 u6 bin 6 Android 14 con pandora box


Guía técnica paso a paso para realizar el bypass de cuenta Google (FRP) en el Samsung Galaxy A34 (SM-A346M) con seguridad Binario 6 (U6) y Android 14. El proceso se realiza mediante la herramienta Pandora Box y requiere de forma obligatoria realizar Test Point para la conexión del dispositivo. Ideal para talleres de servicio técnico que buscan una solución efectiva y rápida.

Se necesita Test point Obligatoriamente

FRP Con Pandora selecionar el modelo y dar en borrar FRP y Limpiar ojo tienes que hacer test point hay mismo espera a que pandora haga su trabajo luego el telefono se reiniciara en recovery has factory reset y espera que suba y listo estara sin cuenta

Debes estar registrado para ver imágenes adjuntar

Selected model: Samsung SM-A346M (Samsung Galaxy A34 5G)
Operation: Erase FRP And Wipe
Software version: 9.25
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM103 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0959
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM103 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xDD8057CF, 0x988B7963, 0xBF8CD21B, 0xEFF101BE
Get Chip ID... [MT6877]
Get SOC ID... [C1E6DCD24E9380C32A8BCC6EF46AD11378FD0612A1213EA3FE6D737C05DACA0D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [17]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KM2L9001CM-B518 (0002)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
   UFS_CID   : KM2L9001CM-B518
   UFS_FWVER : 0002
   BLOCK_SIZE: 0x0000001000 (4.00Kb)
   UFS_LU0   : 0x0000400000 (4.00Mb)
   UFS_LU1   : 0x0000400000 (4.00Mb)
   UFS_LU2   : 0x1DCB000000 (119.17Gb)
RAM INFO:
   INT_SRAM: 0x0000070000 (448.00Kb)
   EXT_RAM : 0x0180000000 (6.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  0% - 10% device life time used
   DeviceLifeTimeEstB:  0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... error
Read product info... [EROFS] ... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A346M
Product Name         : a34xub
Product Device       : a34x
Product Board        : a34x
Board Platform       : mt6877
Build ID             : SP1A.210812.016
Build Date           : Fri Apr 19 06:36:46 KST 2024
Firmware Version     : A346MUBS6BXD1
Userdata FS Type     : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Pandora/Backup/MTK/Samsung_SM-A346M%20(Samsung%20Galaxy%20A34%205G)/FRP_BACKUP_(2026-5-20_16-47-45)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Wipe data done!

​