🔐 Frp Cuenta Google FRP Samsung Galaxy Tab A7 Lite (SM-T227U) Cuenta google Pandora box

[servergsm]

Marca 📱

Samsung

Modelo 🔖

Samsung Galaxy Tab A7 Lite (SM-T227U)

📱 Android / Sistema operativo

Android 14

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

pandora | Pandora Box

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

FRP Samsung Galaxy Tab A7 Lite (SM-T227U) Cuenta google Bit 12 u12 bit C Android 14 con pandora box parche de seguridad 1 de mayo de 2025
​

Guía especializada para la eliminación del bloqueo de Cuenta Google (FRP) en la Samsung Galaxy Tab A7 Lite (SM-T227U). Este método está actualizado para dispositivos con Bit 12 (U12/S12) ejecutando Android 14 y con el parche de seguridad más reciente del 1 de mayo de 2025.

Utilizamos la herramienta Pandora Box para un proceso seguro y eficiente. Aprenderás los pasos necesarios para conectar el dispositivo en modo Brom/Preloader (según soporte), la selección correcta del modelo y la ejecución del comando Erase FRP para saltar la verificación de cuenta de forma permanente.

Nota Importante: Este proceso está diseñado para fines de servicio técnico legal. Asegúrate de tener los controladores Samsung y el software de Pandora Box actualizados a la última versión para garantizar la compatibilidad con el nivel de seguridad 2025.

en pandora selecionar el modelo luego dar en eliminar frp y conetar apagada con tecla de volumenes presionado

Debes estar registrado para ver imágenes adjuntar

​

Selected model: Samsung SM-T227U (Samsung Galaxy Tab A7 Lite)
Operation: Eliminar FRP
Software version: 9.25

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM71 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM21 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0x5E7051CF, 0x65EA40F8, 0x5DCDD70C, 0xA72CBF42
Get Chip ID... [MT6765]
Get SOC ID... [D2E0ECCB01E8633748F8C353FC6534C10DD35362347B9C8D7F128E90A75E3E3B]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010047583642414200F51506E31AA5
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
   EMMC_CNAME: GX6BAB
   EMMC_ID   : 0x15010047583642414200F51506E31AA5
   EMMC_BOOT1: 0x0000400000 (4.00Mb)
   EMMC_BOOT2: 0x0000400000 (4.00Mb)
   EMMC_RPMB : 0x0001000000 (16.00Mb)
   EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
   INT_SRAM: 0x000003A000 (232.00Kb)
   EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  0% - 10% device life time used
   DeviceLifeTimeEstB:  0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... error
Read product info... [EXT4] ... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-T227U
Product Name         : gta7litesq
Product Device       : gta7lite
Product Board        : gta7lite
Board Platform       : mt6765
Build ID             : SP1A.210812.016
Build Date           : Tue May 13 16:05:05 KST 2025
Firmware Version     : T227USQSCEYE2
Userdata FS Type     : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Pandora/Backup/MTK/Samsung_SM-T227U%20(Samsung%20Galaxy%20Tab%20A7%20Lite)/FRP_BACKUP_(2026-4-14_16-50-21)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!

​