Offline
frp TCL 8192A cuenta google con pandora box
TCL 8192A frp lock bypass [done]
Selected model: TCL 8192A
Operation: Erase FRP
Software version: 8.9
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xFFC27FE4, 0x65138B6D, 0x23A7CA2C, 0x11D4558B
Get Chip ID... [MT6761]
Get SOC ID... [61972248BA3C118D7C921615282771AA39961A6EE9E84EFE14 2AA39F0C7D33E6]
Get sec config... OK [000000E1]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD601034133413535311248BEE7D1195F
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A551
EMMC_ID : 0xD601034133413535311248BEE7D1195F
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x073A000000 (28.91Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : 8192A
Product Name : 8192A
Product Device : Freyr_10_1_4G
Product Board : tb8766p1_64_bsp
Board Platform : mt6761
Build ID : TP1A.220624.014
Build Date : Tue Nov 28 10:23:13 HKT 2023
Display ID : 01
Security Patch : 2023-10-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : KYO3
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/TCL_8192A/FRP_BACKUP_(2025-4-26_8-59-15)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!
TCL 8192A frp lock bypass [done]
Selected model: TCL 8192A
Operation: Erase FRP
Software version: 8.9
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xFFC27FE4, 0x65138B6D, 0x23A7CA2C, 0x11D4558B
Get Chip ID... [MT6761]
Get SOC ID... [61972248BA3C118D7C921615282771AA39961A6EE9E84EFE14 2AA39F0C7D33E6]
Get sec config... OK [000000E1]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD601034133413535311248BEE7D1195F
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A551
EMMC_ID : 0xD601034133413535311248BEE7D1195F
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x073A000000 (28.91Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : 8192A
Product Name : 8192A
Product Device : Freyr_10_1_4G
Product Board : tb8766p1_64_bsp
Board Platform : mt6761
Build ID : TP1A.220624.014
Build Date : Tue Nov 28 10:23:13 HKT 2023
Display ID : 01
Security Patch : 2023-10-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : KYO3
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/TCL_8192A/FRP_BACKUP_(2025-4-26_8-59-15)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!
