🔐 Frp Cuenta Google FRP Tecno Pop 6 Go (Modelo Be6 / Be6j) Cuenta Google Pandora

[servergsm]

🧠Procesador / CPU

MediaTek (MTK

🏷️Marca

Tegno

📱Modelo

Tecno Pop 6 Go (modelo BE6 / BE6j)

🤖 Android / Sistema operativo

Android

🔧Tipo de falla / servicio

FRP / Desbloqueos (cuentas, IMEI, red)

🧰Herramienta utilizada

TSM

✅Estado del equipo

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

FRP Tecno Pop 6 Go (modelo BE6 / BE6j) Cuenta Google Pandora
​

17:25:09  Selected model:         Tecno TECNO BE6
17:25:09  Operation:              Erase FRP
17:25:09  Software version:       10.3.2
17:25:09   
17:25:09  Connect phone in BROM mode.
17:25:09  Waiting for device... OK
17:25:30  Device found at COM12
17:25:30  Port:                   USB\VID_0E8D&PID_0003\5&227DB1D&0&3
17:25:30  Driver:                 [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
17:25:30  Port type:              BROM
17:25:30  Open port... OK
17:25:30  Send start cmd... OK
17:25:30  Get HW code...          [6580]
17:25:30  Get HW & SW version from device... OK
17:25:30  HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
17:25:30  Detect chip             [MT6580]
17:25:30  Library Version         [1]
17:25:30  Select platform... OK
17:25:30  Init BROM... OK
17:25:30  Force Charge... OK
17:25:30  Disable WatchDog Timer... OK
17:25:30  Get sec config...       [00000005]
17:25:30  Active sec flags:       [SBC DAA]
17:25:30  Release testpoint, waiting 2 seconds...
17:25:32  Advanced Bypass Security... OK
17:25:33  Waiting for device... OK
17:25:33  Device found at COM12
17:25:33  Port:                   USB\VID_0E8D&PID_0003\5&227DB1D&0&3
17:25:33  Driver:                 [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
17:25:33  Port type:              BROM
17:25:33  Open port... OK
17:25:33  Send start cmd... OK
17:25:33  Get HW code...          [6580]
17:25:33  Init BROM... OK
17:25:33  Force Charge... OK
17:25:33  Disable WatchDog Timer... OK
17:25:33  Get sec config...       [00000000]
17:25:33  Get BROM version... OK
17:25:33  Read MEID... OK
17:25:33  MEID: A79CC577FF7A3387F67FF6E1E8D815C5
17:25:33  Load DownloadAgent... OK
17:25:33  Search DA... OK [26]
17:25:34  DA file: MTK_AllInOne_DA_v2.crp
17:25:34  Send preloader... OK
17:25:34  Start preloader... OK
17:25:34  Checking preloader answer... OK
17:25:35  Send bootloader... OK
17:25:35  Start bootloader... OK
17:25:35  Wait for answer from bootloader... OK
17:25:35  Wait for hw detection... OK
17:25:35  Wait DA version... v4.2
17:25:35  Send BROM version... OK
17:25:35  Send storage config... OK
17:25:35  SyncBmtInfoWithDA... OK
17:25:35  Set params... OK
17:25:36  Read flash info... OK
17:25:37  EMMC_ID: 0x51000115413336588A8203429949B890
17:25:37  Load EMI from phone... OK
17:25:37  Init DRAM... OK
17:25:37  Enable DRAM... OK
17:25:37  Sync with DA... OK
17:25:37  Wait for DA H/W detection... OK
17:25:38  EMMC INFO:
17:25:38     EMMC_CNAME: QX63AB
17:25:38     EMMC_ID: 0x15010051583633414203828A90B84999
17:25:38     EMMC_BOOT1:          0x0000400000 ( 4.00Mb )
17:25:38     EMMC_BOOT2:          0x0000400000 ( 4.00Mb )
17:25:38     EMMC_RPMB :          0x0000400000 ( 4.00Mb )
17:25:38     EMMC_USER :          0x0747C00000 ( 29.12Gb )
17:25:38  RAM INFO:
17:25:38     INT_SRAM  :          0x0000020000 ( 128.00Kb )
17:25:38     EXT_RAM   :          0x0080000000 ( 2.00Gb )
17:25:38  HEALTH:
17:25:38     Pre EOL Info: normal
17:25:38     DeviceLifeTimeEstA: 30% - 40% device life time used
17:25:38     DeviceLifeTimeEstB: 30% - 40% device life time used
17:25:38  Checking USB status... USB_FULL_SPEED
17:25:38  Switching to USB high speed... OK
17:25:38  Waiting for HS device... OK
17:25:39  Reopen port for high speed... OK
17:25:39  Checking USB status... USB_HIGH_SPEED
17:25:39  Read partitions info from phone... OK
17:25:39  Checking A/B state... OK [A]
17:25:39  Read product info... [EXT4] ... OK
17:25:40  Product Brand:          TECNO
17:25:40  Product Manufacturer:   TECNO MOBILE LIMITED
17:25:40  Product Model:          TECNO BE6
17:25:40  Product Name:           BE6-OP
17:25:40  Product Device:         TECNO-BE6
17:25:40  Product Board:          BE6
17:25:40  Board Platform:         mt6580
17:25:40  Build ID:               RP1A.200720.011
17:25:40  Build Date:             Thu Mar 21 16:44:44 CST 2024
17:25:40  Display ID:             BE6-VP596A-RGo-OP-240321V22
17:25:40  Security Patch:         2024-02-05
17:25:40  Version SDK:            30
17:25:40  Version Release:        11
17:25:40  Version Codename:       REL
17:25:40  Firmware Version:       240321V22
17:25:40  Backup [frp.bin]... OK
17:25:40  Saved to C:\Users\HP ProBook 440\MTK\Tecno_TECNO BE6\Erase FRP_2026-10-30_17-25-40\
17:25:40  Formatting "frp" partition... OK
17:25:40  Writting FRP data... OK
17:25:41  Reboot device... OK
17:25:41  Operation completed