Offline
frp TECNO Spark 10 cuenta google con nck
LogS:
Reset FRP]
Connect USB Calble to turned off device without pressing any key.
Some device may need you to hold VOL UP/DOWN while connecting.
Waiting for device...Found
Port Info : MediaTek PreLoader USB VCOM (Android) (COM4) [\\?\usb#vid_0e8d&pid_2000#6&26bde6ad&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}]
: MediaTek Inc., 3.2.0.0 [usb2ser.sys]
: PRELOADER PORT
Helio Boot PL Xiaomi Exploit
HW ID : MT6765 [0766] Helio P35/G35
HW VER : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Active]
MEID : 94EA6466EE1BABBE4D1C0CED8F22998A
SoC ID[0] : 07250E063FC77F02583495822075770A
SoC ID[1] : A712820C59CAEFDA19F51A2B092B7E3C
Sending DA1...Done
Running DA1...Done
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : preloader
Speed : high-speed
Sending DA2...OK
HRID : D914200565ACDF141929635A3FE0DD68
SRAM : 0x000000000003A000 [232.00 KB]
DRAM : 0x0000000100000000 [4.00 GB]
EMMC ID : A3A562
EMMC CID : D60103413341353632119218472E6A85
BOOT[1] : 0x0000000000400000 [4.00 MB]
BOOT[2] : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001CCF000000 [115.23 GB]
Enable HiSpeed DA Port...Done
Connecting to DA Port...Connected
Reading Parititon Info...OK
Reset FRP Data...Done
Process finished
[NCK MTK Exploit Tool v1.7]
LOG TXT : 20250519_183038.txt
LogS:
Reset FRP]
Connect USB Calble to turned off device without pressing any key.
Some device may need you to hold VOL UP/DOWN while connecting.
Waiting for device...Found
Port Info : MediaTek PreLoader USB VCOM (Android) (COM4) [\\?\usb#vid_0e8d&pid_2000#6&26bde6ad&0&3#{86e0d1e0-8089-11d0-9ce4-08003e301f73}]
: MediaTek Inc., 3.2.0.0 [usb2ser.sys]
: PRELOADER PORT
Helio Boot PL Xiaomi Exploit
HW ID : MT6765 [0766] Helio P35/G35
HW VER : 8A00,CA00,0000
Sec. Cfg : [SBA Active] [SLA Inactive] [DAA Active]
MEID : 94EA6466EE1BABBE4D1C0CED8F22998A
SoC ID[0] : 07250E063FC77F02583495822075770A
SoC ID[1] : A712820C59CAEFDA19F51A2B092B7E3C
Sending DA1...Done
Running DA1...Done
Waiting DA SYNC Signal...OK
Setting Checksum Level...Done [Storage]
Connection : preloader
Speed : high-speed
Sending DA2...OK
HRID : D914200565ACDF141929635A3FE0DD68
SRAM : 0x000000000003A000 [232.00 KB]
DRAM : 0x0000000100000000 [4.00 GB]
EMMC ID : A3A562
EMMC CID : D60103413341353632119218472E6A85
BOOT[1] : 0x0000000000400000 [4.00 MB]
BOOT[2] : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000001CCF000000 [115.23 GB]
Enable HiSpeed DA Port...Done
Connecting to DA Port...Connected
Reading Parititon Info...OK
Reset FRP Data...Done
Process finished
[NCK MTK Exploit Tool v1.7]
LOG TXT : 20250519_183038.txt
