🔐 Frp Cuenta Google FRP Vivo Y93 Cuenta google con UMT

[servergsm]

Marca 📱

Oppo / Vivo / Realme

Modelo 🔖

Vivo Y93

📱 Android / Sistema operativo

Android

Tipo de falla / servicio 🛠️

FRP / Desbloqueos (cuentas, IMEI, red)

🔧Herramienta utilizada

umt | UMT Pro

Estado del equipo 📋

Bloqueado (Contraseña o cuenta Google) FRP O Hart Reset

¿Problema resuelto?

si | ✅ Resuelto

Remover Cuenta Google FRP A Vivo Y93 con umt
​

Operation    : Format FS
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM46)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver.    : 2
Hardware ID    : E1F00B00 [8937] 00000000
OPK_DATA    : 30315EBED1DD09CEAAE927CAE0EE967076BC178CA33718DB4FFF8F02A0E7FAD2
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_029]...Done
Executing Loader...OK
SMEM Check Pass!
SMEM Check Pass!
Hardware    : 8937, hC8aP> (eMMC), 64 GB
LU Count    : 3 [0x0747C000] [0x00002000] [0x00002000]
Payload Info    : [IN: 524288] [ OUT: 1048576] [SafeMode:ON]
Reading Partition Table...OK [59]
Reading Device Information...OK
Device    : vivo vivo 1807 [msm8937_64]
Brand    : vivo
Prod.Name    : msm8937_64
Software    : OPM1.171019.026 release-keys, eng.compil.20210118.194257 [Mon Jan 18 19:42:57 CST 2021]
Android Ver.    : 8.1.0
Patch Level    : 2021-01-01
Formatting userdata [SafeMode]...Done
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 13.3