Offline
¡NOTA! (necesita arrancar en modo EDL manualmente, de lo contrario puede que no funcione)
* primero arranque en modo FTM apagando el teléfono, conecte el cable mientras mantiene presionado el volumen hacia abajo
* luego arranque en modo EDL usando el comando adb "adb reboot edl"
* y haga clic en RESET FRP
Debes estar registrado para ver imágenes adjuntar
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM16)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000400
OPK_DATA : A4F889863F66ABF67892BE4BFC68025AF5E25CB69AE2BAA25DFF4BCA141C5EBA
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Firehose Loader...Done
Sending Loader [8909_046.ufl]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : ZTE K81 [msm8909]
Software : K81RV1.0.0B03, 20170614.004810 [Wed Jun 14 00:47:23 CST 2017]
Android Ver. : 7.1.1
Patch Level : 2017-06-01
Resetting FRP Lock......Done
Operation Finished.
