Admin
En línea
- Marca 📱
- Otras Marcas
- Modelo 🔖
- Alcatel 8050X Pixi 4
- 📱 Android / Sistema operativo
- Android
- Tipo de falla / servicio 🛠️
- Certificados / Red / IMEI
- 🔧Herramienta utilizada
- pandora | Pandora Box
- Estado del equipo 📋
- Reparación de IMEI / Banda Base
- ¿Problema resuelto?
- si | ✅ Resuelto
Alcatel 8050X Pixi 4 reparar imei f4 con pandora
Código:
Selected model: Alcatel 5080X (Alcatel Shine Lite)
Operation: Repair
Software version: 9.25
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... FULL
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0335
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM49 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0335
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CB00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0x1F3EF57E, 0xB4813F69, 0x6C83134F, 0xC3B74F71
Get BROM version... OK
Search DA... OK [30]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Checking bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x150100514531334D420D608390A92A71
Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_CNAME: QE13MB
EMMC_ID : 0x150100514531334D420D608390A97471
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x03A3E00000 (14.56Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 40% - 50% device life time used
DeviceLifeTimeEstB: 40% - 50% device life time used
Checking USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek DA USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
High Speed USB detected at COM13
Open port... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... error
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : 5080X
Product Name : 5080X
Product Device : shine_lite
Product Board : MT6737
Board Platform : mt6737m
Build ID : MRA58K
Build Date : Fri Jun 8 09:22:44 CST 2018
Display ID : MRA58K release-keys
Security Patch : 2017-11-05
Version SDK : 23
Version Release : 6.0
Version Codename : REL
Firmware Version : v2C35-0
Get OTP size... OK [0x00800000]
Read OTP... OK
IMEI: TR_LAZ
Set new IMEI to:
IMEI: TR_LAZ
Checking OTP status... [S_DA_OTP_LOCKED]
Write OTP... OK
Repair Security done!