Online
Galaxy A50 a505g hacer f4 Imei bit 5 u5 bin5 Binary 5 binario 5 rev5 chimera tool
a505g u5 android9 pero cliente queria en v10
asi procedi hacer la actualizacion android10 y luego hice trabajo para repair y pacht
root lo hice eftroot y salio al 100% fino aqui les dejo un logs
-------------------------------------------------------------------------------------------------------
Chimera Mobile Phone Utility version: 26.39.2153 @ 2020-10-25
Printing phone history
Patch Certificate
25/10/2020
10:43
p.m.
Patch Certificate
11/09/2020
04:30
p.m.
Patch Certificate
11/09/2020
04:28
p.m.
Patch Certificate
11/09/2020
04:25
p.m.
Patch Certificate
11/09/2020
04:19
p.m.
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A505G
Carrier ID: PNT
Sales Code: TPA
Country Code: PANAMA
Timezone: America/Lima
Android Version: 10 [QP1A.190711.020] [SDK 29]
Build Date: Mon Aug 10 23:16:12 KST 2020
PDA Version: A505GUBS5BTH2 [august 2020, rev2]
Phone Version: A505GDXS5BTH2 [august 2020, rev2]
CSC Version: A505GOWO5BTC4 [march 2020, rev4]
Board Platform: UNIVERSAL9610
Modem Platform: SHANNON337
Serial Number: R28M60WPGJR
Imei: 355531245789635
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2020-08-01
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
The phone must be started in recovery mode to be rooted!
To start recovery, you must use a key combo at startup. Usually [volume_up + power] or [volume_up + bixby + power].
Without root the patchcert will not work!
Restarting phone in recovery mode...
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [10.25.20 17:47:46]
WorkID: 112746253
a505g u5 android9 pero cliente queria en v10
asi procedi hacer la actualizacion android10 y luego hice trabajo para repair y pacht
root lo hice eftroot y salio al 100% fino aqui les dejo un logs
-------------------------------------------------------------------------------------------------------
Chimera Mobile Phone Utility version: 26.39.2153 @ 2020-10-25
Printing phone history
Patch Certificate
25/10/2020
10:43
p.m.
Patch Certificate
11/09/2020
04:30
p.m.
Patch Certificate
11/09/2020
04:28
p.m.
Patch Certificate
11/09/2020
04:25
p.m.
Patch Certificate
11/09/2020
04:19
p.m.
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-A505G
Carrier ID: PNT
Sales Code: TPA
Country Code: PANAMA
Timezone: America/Lima
Android Version: 10 [QP1A.190711.020] [SDK 29]
Build Date: Mon Aug 10 23:16:12 KST 2020
PDA Version: A505GUBS5BTH2 [august 2020, rev2]
Phone Version: A505GDXS5BTH2 [august 2020, rev2]
CSC Version: A505GOWO5BTC4 [march 2020, rev4]
Board Platform: UNIVERSAL9610
Modem Platform: SHANNON337
Serial Number: R28M60WPGJR
Imei: 355531245789635
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2020-08-01
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
The phone must be started in recovery mode to be rooted!
To start recovery, you must use a key combo at startup. Usually [volume_up + power] or [volume_up + bixby + power].
Without root the patchcert will not work!
Restarting phone in recovery mode...
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [10.25.20 17:47:46]
WorkID: 112746253
