📶Imei/F4 Hacer f4 imei reparar a tecno camon 18T con pandora box

[servergsm]

Reparar imei f4 a tecno camon 18T con pandora box

Aprende el proceso completo y detallado para reparar el error IMEI F4 en tu teléfono Tecno Camon 18T utilizando la herramienta profesional Pandora Box. Este tutorial está diseñado para técnicos y usuarios avanzados que buscan una solución efectiva y segura para restaurar la funcionalidad de red del dispositivo. Sigue nuestra guía paso a paso, conoce las precauciones necesarias y recupera el correcto funcionamiento de tu móvil de forma rápida y confiable.
​

Selected model: Tecno CH6T (Tecno Camon 18T)
Operation: Repair
Software version: 9.7

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM36 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM36 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xC47CCF42, 0x2FB17488, 0xC0FBA7BC, 0x1111CF1A
Get Chip ID... [MT6768]
Get SOC ID... [7FE8E37BE96909C30AFED960820B1E921BC67A121FE98FFC0C F2294E6E1DD19D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100445636444142028F22DC1E78A5
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DV6DAB
EMMC_ID : 0x150100445636444142028F22DC1E78A5
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [B]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO CH6h
Product Name : CH6h-AS
Product Device : TECNO-CH6h
Product Board : TECNO-CH6h
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Wed Oct 11 17:35:03 CST 2023
Display ID : TECNO-S-64-231011V439
Security Patch : 2023-10-05
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : 231011V656
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... OK
IMEI: 350000000000000
Repairing IMEI...
IMEI: 35000000000000
Write IMEI [NVDATA]... OK
Write IMEI [NVRAM]... OK
Write partition "nvdata"... OK
Write partition "nvram"... OK
Repair Security done!