Online
Lenovo S850 Hart reset
Exe version: NCKBox AndroidMTK 2.9.7
Selected model: 0-By CPU MT6582
Action: Reset Pattern
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(11) : MediaTek PreLoader USB VCOM (Android) (COM11)
[11] \\?\usb#vid_0e8d&pid_2000#5&15c311e1&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x4b3858564d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004B3858564D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(12) : MediaTek DA USB VCOM (Android) (COM12)
[12] \\?\usb#vid_0e8d&pid_2001#5&15c311e1&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[1]locksettings.db erased ok
[1]locksettings.db-wal erased ok
[1]locksettings.db-shm erased ok
[1]gesture.key erased ok
If phone remain on logo, repower phone again.
If lock remain, perform 2 times reset without power on phone.
Wait untill phone will start charging.
[0]All done.
Exe version: NCKBox AndroidMTK 2.9.7
Selected model: 0-By CPU MT6582
Action: Reset Pattern
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(11) : MediaTek PreLoader USB VCOM (Android) (COM11)
[11] \\?\usb#vid_0e8d&pid_2000#5&15c311e1&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 6582 1 ca01
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6582
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x4b3858564d42
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 1501004B3858564D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(12) : MediaTek DA USB VCOM (Android) (COM12)
[12] \\?\usb#vid_0e8d&pid_2001#5&15c311e1&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[1]locksettings.db erased ok
[1]locksettings.db-wal erased ok
[1]locksettings.db-shm erased ok
[1]gesture.key erased ok
If phone remain on logo, repower phone again.
If lock remain, perform 2 times reset without power on phone.
Wait untill phone will start charging.
[0]All done.
