Online
Id Huawei Y9a remover con umt
proceso con UMT mtk
conectado por test point y listo en menos de un minuto
Operation : Remove Huawei ID
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM18 [MediaTek USB Port (COM18)]
Device Path: \\?\usb#vid_0e8d&pid_0003#5&2191cfca&0&11#{f9f3ff14-ae21-48a0-8a25-8011a7a931d9}
Chipset: 0x0707, [MT6768] [Helio P65/G85 k68v1]
Hardware Info: 0x8A00, 0xCA00, 0x00
Config : [SecureBoot: True] [SLA: False] [DA Auth: True]
MEID: 3E23F082C68C61F19C45C77CA71CE645
Preparing device...
-- Success!
Preloader saved as : preloader_k69v1_64_220801_175014.bin
DA : DA_PL_CRYPTO20.bin
Using Custom DA!
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM18)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Information...
-- Could not read!
Userdata is ENCRYPTED
Reading Backup...
- Done
Saved as: RPMB_Unknown_Unknown_Unknown_20220108_175022.bin
Removing Huawei ID...
- Success
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 5.0]
