📶Imei/F4 Imei Y6 Mrd-lx3 Furious Gold Pack 6 2019 via tespoint

[servergsm]

1. Seleccionar Casilla Repair IMEI
2. Ingresar los 14 #´s
3. Conectar el Equipo con bateria y haciendo el TP; cuando el software lo solicite. (siempre dejar el TP conectado hasta que inicie la lectura para ue se estabilize la conexion).
4. El software pide que desconecte el equipo y lo vuelva a conectar SIN TP.
5. El equipo se colocara en Fastboot Mode y terminara el proceso.



Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM27))
Preparing to start flash mode;
Preparing to open COM27
Connecting;
Downloading DA;
Initializing;
Rid: f6644bfb061c868afafc2ed0eab8a9b3
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xE4E80142 0xD11683D3 [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x14E800000 SIZE: 0x5F9200000



Searching data;
Checking data;

Contents saved to :
D:\Gestion\Furious\Pack 6\OTSmart_v1.0.0.3475\HUAWEI MRD-LX3_IMEI_3AB52774_6B046BF2_f6644bfb061c868afafc2ed0eab8a9b3_5_08_2019_09_21_41.o
p
Downloading images...
Done;
Searching phone;
(insert the USB cable in the powered off phone)

Phone detected (MediaTek PreLoader USB VCOM (Android) (COM10))
Preparing to start fastboot mode;

Done; Fastboot mode entered;
Connecting;
switching_fastboot_mode: OK;
resistance is futile : OK !?;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;

IMEI repaired; Remove battery and cable;

Time needed - 00:01:17

Log file saved to: LOG_5_08_2019_09_22_57.txt


6. Seleccionar la opcion de Write Factory Firmware y cargar el Archivo Madrid-L21A 9.0.1.184(C431E5R2P1)_Firmware_9.0.0_r3_EMUI9.0.1.osp esta en el Soporte.
7. Darle Connect y esperar que el software solicite Conectar el equipo CON TP. (siempre dejar el TP conectado hasta que inicie la lectura para ue se estabilize la conexion).
8. Y a Cobrar.


Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM27))
Preparing to start flash mode;
Preparing to open COM27
Connecting;
Downloading DA;
Initializing;
Rid: f6644bfb061c868afafc2ed0eab8a9b3
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xE4E80142 0xD11683D3 [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x14E800000 SIZE: 0x5F9200000


Loading the file ...
Cfg done ...
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:06:11

Log file saved to: LOG_5_08_2019_09_30_12.txt​