Online
Unlock
CON OCTOPLUS, SOLO HAY QUE CONTAR CON OCTOPLUS Y CON UNA CUENTA DE CREDITOS POR LO MENOS DE 100 YA QUE ESO NOS CONSUMIRA, DESPUES DE ESO ELEGIR EL MODELO EXACTO Y DARLE EN LIBERAR. LUEGO CONECTAMOS EL TELEFONO APAGADO Y APRETANDO EL VOLUMEN (+), Y LO DEJAMOS, NO ESTOY SEGURO SI ES NECESARIO ACTIVAR LA DEPURACION USB Y EL DESBLOQUEO OEM. EL TELEFONO SE REINCIARA MUCHAS VECES A MODO DOMWLOAD. DEJO AQUI TODO EL PROCESO DE OCTOPLUS.
Connecting to server ...OK
Username: QfiS29lfud
Authorizing...OK
Checking balance...OK
Your balance: 100 credits.
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000000000693F3E
Checking data...OK
Plataforma: LG MTK
Puerto seleccionado: COM223
Velocidad seleccionada: 921600
Modelo seleccionado: K410HM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM97
Mode: Emergency
Initializing flash...OK
Model ID: LM-K410HM
Plataforma: mt6765
Android version: 9
Versión de SW: LMK410HMAT-01-V10a-SCA-XXX-MAR-24-2020+0
LAF Version: 1.1
Product ID: LCL2S200817309145
IMEI: 353673-11-211900-0
Target operator: LAO
Hardware: rev_10
Battery level: 100%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: XXXXXXXXXXXXXXXXX
Dirección de Bluetooth: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Lectura de la zona de seguridad...
Backup reservado en "K410HM_353673112119000_12-01-2021_14-22-47.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: QfiS29lfud
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Liberación...OK
Escritura de la zona de seguridad...
Initializing flash...OK
Escritura de la zona de seguridad...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Borramiento part 1...OK
Initializing flash...OK
Borramiento part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
¡El teléfono está liberado con éxito!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.8 Software version.
CON OCTOPLUS, SOLO HAY QUE CONTAR CON OCTOPLUS Y CON UNA CUENTA DE CREDITOS POR LO MENOS DE 100 YA QUE ESO NOS CONSUMIRA, DESPUES DE ESO ELEGIR EL MODELO EXACTO Y DARLE EN LIBERAR. LUEGO CONECTAMOS EL TELEFONO APAGADO Y APRETANDO EL VOLUMEN (+), Y LO DEJAMOS, NO ESTOY SEGURO SI ES NECESARIO ACTIVAR LA DEPURACION USB Y EL DESBLOQUEO OEM. EL TELEFONO SE REINCIARA MUCHAS VECES A MODO DOMWLOAD. DEJO AQUI TODO EL PROCESO DE OCTOPLUS.
Connecting to server ...OK
Username: QfiS29lfud
Authorizing...OK
Checking balance...OK
Your balance: 100 credits.
--------------------------------------------------------------------------------
Selected USB connection type
Work ID: 0000000000693F3E
Checking data...OK
Plataforma: LG MTK
Puerto seleccionado: COM223
Velocidad seleccionada: 921600
Modelo seleccionado: K410HM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM97
Mode: Emergency
Initializing flash...OK
Model ID: LM-K410HM
Plataforma: mt6765
Android version: 9
Versión de SW: LMK410HMAT-01-V10a-SCA-XXX-MAR-24-2020+0
LAF Version: 1.1
Product ID: LCL2S200817309145
IMEI: 353673-11-211900-0
Target operator: LAO
Hardware: rev_10
Battery level: 100%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: XXXXXXXXXXXXXXXXX
Dirección de Bluetooth: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Lectura de la zona de seguridad...
Backup reservado en "K410HM_353673112119000_12-01-2021_14-22-47.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: QfiS29lfud
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Liberación...OK
Escritura de la zona de seguridad...
Initializing flash...OK
Escritura de la zona de seguridad...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Borramiento part 1...OK
Initializing flash...OK
Borramiento part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
¡El teléfono está liberado con éxito!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.8 Software version.
