Offline
de igual forma sale el equipo
conectandolo apagado y presionando las dos teclas de volumen hasta que se quede el logo congelado.
aparecera como MEDIATEK Usb Vcom.
damos unlock y listo.
sin necesidad de root
de igual forma sale por calculo...
otra forma
Con Sigma me salio exitoso el proceso en plataforma MTK pero al encenderlo seguia bloqueado, lo tuve que hacer con NCK y lo desbloqueo correctamente
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.9.0
Selected model: OT-4003A
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x464a32354142
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 150100464A32354142 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM24)
MODEL FROM PROINFO: 4003A-2ATLMX1
SECRO FROM PROINFO: X5B0Q104AZ1A
OTP IMEI: 014xxxxxxxxxx
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:0) Code : 319xxxxxxxxxx
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[2780]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.
conectandolo apagado y presionando las dos teclas de volumen hasta que se quede el logo congelado.
aparecera como MEDIATEK Usb Vcom.
damos unlock y listo.
sin necesidad de root
Debes estar registrado para ver imágenes adjuntar
de igual forma sale por calculo...
Debes estar registrado para ver imágenes adjuntar
otra forma
Con Sigma me salio exitoso el proceso en plataforma MTK pero al encenderlo seguia bloqueado, lo tuve que hacer con NCK y lo desbloqueo correctamente
Debes estar registrado para ver imágenes adjuntar
Debes estar registrado para ver imágenes adjuntar
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.9.0
Selected model: OT-4003A
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM6)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) SAMSUNG 0x464a32354142
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 150100464A32354142 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9880000 [3.649 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM24)
MODEL FROM PROINFO: 4003A-2ATLMX1
SECRO FROM PROINFO: X5B0Q104AZ1A
OTP IMEI: 014xxxxxxxxxx
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:0) Code : 319xxxxxxxxxx
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[2780]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.
