liberar Pcd Ph4002 Unlock con nck

[servergsm]

NCKBox procesador MT6572, unlock flash mode.


Exe version: NCKBox AndroidMTK 1.8.9.6
Selected model: 0-By CPU MT6572
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM19)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) TOSIBA 0x303034474530
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 110100303034474530 : 00000000000000
EMMC UA SIZE: 0xec000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xec480000 [3.692 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
IMEI[1]: 352472090661690
IMEI[2]: 352472090661690
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:0) Code : 65872143
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:5) Code : 65872143
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[2060]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.