Offline
Tengo este móvil con un SLOT de SIM bloqueado permanentemente y el otro SLOT al cual le falta solo 1 intento para bloquearse permanentemente. Será que el proceso es tan sencillo y tan trivial que no necesita que haya NADA posteado acerca del asunto. Lo curioso es que esa info fue leía por NCK
Exe version: NCKDongle AndroidMTK 2.5.9.7
Selected model: 0-By CPU MT6580
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[10]Detected: MediaTek PreLoader USB VCOM (Android) (COM10)
\\?\usb#vid_0e8d&pid_2000#5&d27efef&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[11]META Port Detected: Gadget CDC VCOM Driver (COM11)
USB\VID_0E8D&PID_2007\5&D27EFEF&0&2
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6580,S01
[META]BaseBand CPU : MT6580, E01
Using Algo 1.
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V6.P4
[META]HW_VER : KEYTAK6580_WE_L_HSPA_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : XXXXXXXXXXXXXXX
Phone imei[2] : XXXXXXXXXXXXXXX
Simlock Info : Sim [1]
Block1[N] :Locked [remain:1] Code : XXXXXXXX
Block2[NS] :Unlocked Code: XXXXXXXX
Block3[SP] :Unlocked Code: XXXXXXXX
Block4[C] :Unlocked Code: XXXXXXXX
Block5[SIM]:Unlocked Code: XXXXXXXX
**************************************
Simlock Info : Sim [2]
Block1[N] :Locked [remain:0] Code : XXXXXXXX
Block2[NS] :Unlocked Code: XXXXXXXX
Block3[SP] :Unlocked Code: XXXXXXXX
Block4[C] :Unlocked Code: XXXXXXXX
Block5[SIM]:Unlocked Code: XXXXXXXX
**************************************
1.Power phone with unacepted simcard.
2.Type code code when phone ask about.
3.For advansed info power phone with original card.
4.Type *#*#3646633#*#* and from engeneering menu select SIMMELOCK
If phone relock after power off, enter unlock code and make wipe.
All done.
Exe version: NCKDongle AndroidMTK 2.5.9.7
Selected model: 0-By CPU MT6580
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[10]Detected: MediaTek PreLoader USB VCOM (Android) (COM10)
\\?\usb#vid_0e8d&pid_2000#5&d27efef&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[11]META Port Detected: Gadget CDC VCOM Driver (COM11)
USB\VID_0E8D&PID_2007\5&D27EFEF&0&2
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6580,S01
[META]BaseBand CPU : MT6580, E01
Using Algo 1.
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V6.P4
[META]HW_VER : KEYTAK6580_WE_L_HSPA_HW
Meta mode conected ok, start reading phone....
Phone imei[1] : XXXXXXXXXXXXXXX
Phone imei[2] : XXXXXXXXXXXXXXX
Simlock Info : Sim [1]
Block1[N] :Locked [remain:1] Code : XXXXXXXX
Block2[NS] :Unlocked Code: XXXXXXXX
Block3[SP] :Unlocked Code: XXXXXXXX
Block4[C] :Unlocked Code: XXXXXXXX
Block5[SIM]:Unlocked Code: XXXXXXXX
**************************************
Simlock Info : Sim [2]
Block1[N] :Locked [remain:0] Code : XXXXXXXX
Block2[NS] :Unlocked Code: XXXXXXXX
Block3[SP] :Unlocked Code: XXXXXXXX
Block4[C] :Unlocked Code: XXXXXXXX
Block5[SIM]:Unlocked Code: XXXXXXXX
**************************************
1.Power phone with unacepted simcard.
2.Type code code when phone ask about.
3.For advansed info power phone with original card.
4.Type *#*#3646633#*#* and from engeneering menu select SIMMELOCK
If phone relock after power off, enter unlock code and make wipe.
All done.