reparar Boot Lg-k371 Fix

[servergsm]

Buenas comparto la solucion de reparacion de boot para Lg-k371 ya que no encontre nada y el equipo no prendia solo activava el puerto qloader espero sea de gran ayuda.
1.Abrimos medusa pro
2.escogemos lg modelo k373
3.bajamos el archivo srf.
4. procedemos hacer le pinout que nos muestra
5.selecionamos conectar
6.conectamos el equipo
7.ojo cuando cambie a sending loader quitar el pinout si no dara error
8.cuando termine con exito esamblamos todo nuevamente y procedemos a flashear
aqui dejo las capturas de que si funciona aunque no sea el mismo modelo tambien dejo el proceso del trabajo.

Welcome to Medusa Pro Software version 1.3.4.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0

Model Settings:
Interface : USB
Brand : LG
Model : K373
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_K373_USB.srf
Core : Qualcomm MSM8909
Loader : QLoader_v2

Connecting...
Sending loader...OK.Nop sending error.

Model Settings:
Interface : USB
Brand : LG
Model : K373
SRF : C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_K373_USB.srf
Core : Qualcomm MSM8909
Loader : QLoader_v2

Connecting...
Sending loader...OK.
Loader successfully initialized.

Device : CoreID_009600E1
Core : Qualcomm MSM8909
Page size : 512 B
Block size : 512 B
Block count : 30535680
Size : 14.56 GB
Connect successful.
---------------------------------------------------------------
SW: 1.3.4; FW: 1.16.
P00: GPT (00000000, 00004000)
P01: modem (00004000, 00020000)
P02: sbl1 (00024000, 00000400)
P03: tz (00024400, 00000800)
P04: rpm (00024C00, 00000400)
P05: aboot (00025000, 00001000)
P06: sbl1bak (00026000, 00000400)
P07: tzbak (00026400, 00000800)
P08: rpmbak (00026C00, 00000400)
P09: abootbak (00027000, 00001000)
P10: modemst1 (00028000, 00000C00)
P11: modemst2 (00028C00, 00000C00)
P12: ssd (00029800, 00000400)
P13: DDR (00029C00, 00000400)
P14: fsg (0002A000, 00000C00)
P15: fsc (0002AC00, 00000400)
P16: sec (0002B000, 00000400)
P17: keystore (0002B400, 00000400)
P18: encrypt (0002B800, 00000400)
P19: eksst (0002BC00, 00000400)
P20: devinfo (0002C000, 00000800)
P21: config (0002C800, 00000400)
P22: spare1 (0002CC00, 00003400)
P23: fota (00030000, 00003000)
P24: rct (00033000, 00000400)
P25: spare2 (00033400, 00000C00)
P26: raw_resources (00034000, 00000800)
P27: raw_resourcesbak (00034800, 00000800)
P28: drm (00035000, 00003000)
P29: sns (00038000, 00003000)
P30: misc (0003B000, 00005000)
P31: persist (00040000, 00004000)
P32: laf (00044000, 00008000)
P33: boot (0004C000, 00008000)
P34: recovery (00054000, 00008000)
P35: recoverybak (0005C000, 00008000)
P36: factory (00064000, 0000C000)
P37: mpt (00070000, 00010000)
P38: system (00080000, 0060E000)
P39: cache (0068E000, 00267000)
P40: userdata (008F5000, 01427000)
P41: grow (01D1C000, 00002FDF)
Reapairing from file "C:/Program Files/Octoplus Pro JTAG Software/firmwareFolder/LG_K373_USB.srf".
Write data verification is enabled.
Writing GPT partition... Done.
Writing modem partition... Done.
Writing sbl1 partition... Done.
Writing tz partition... Done.
Writing rpm partition... Done.
Writing aboot partition... Done.
Writing sbl1bak partition... Done.
Writing tzbak partition... Done.
Writing rpmbak partition... Done.
Writing abootbak partition... Done.
Writing modemst1 partition... Done.
Writing modemst2 partition... Done.
Writing ssd partition... Done.
Writing DDR partition... Done.
Writing fsg partition... Done.
Writing fsc partition... Done.
Writing sec partition... Done.
Writing keystore partition... Done.
Writing encrypt partition... Done.
Writing eksst partition... Done.
Writing devinfo partition... Done.
Writing config partition... Done.
Writing spare1 partition... Done.
Writing fota partition... Done.
Writing rct partition... Done.
Writing spare2 partition... Done.
Writing raw_resources partition... Done.
Writing raw_resourcesbak partition... Done.
Writing drm partition... Done.
Writing sns partition... Done.
Writing misc partition... Done.
Writing persist partition... Done.
Writing laf partition... Done.
Writing boot partition... Done.
Writing recovery partition... Done.
Writing recoverybak partition... Done.
Writing factory partition... Done.
Writing mpt partition... Done.

Smart Repair is successfully complete.
SW: 1.3.4; FW: 1.16.
Disconnected.​