Offline
Debes estar registrado para ver imágenes adjuntar
Debes estar registrado para ver los enlaces
Luego reparamos y parchamos con Chimera!
Log Reparacion:
Repair started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J600G
Carrier ID: UFN
Sales Code: ARO
Country Code: Argentina
Timezone: America/Argentina/Buenos_Aires
Android Version: 10 [QP1A.190711.020] [SDK 29]
Build Date: Wed Oct 14 06:37:47 KST 2020
PDA Version: J600GUBU8CTJ2 [october 2020, rev2]
Phone Version: J600GDXU8CTI2 [september 2020, rev2]
CSC Version: J600GOWO8CTI2 [september 2020, rev2]
Board Platform: UNIVERSAL7870
Modem Platform: SHANNON315
Serial Number: R28K61KNE3H
Imei: 35XXXXXXXX
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2020-09-01
Repair imei...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Current imei: 35XXXXXXXX
Repaired imei: 35XXXXXXXX
Successfully finished.
Finished at local time: [12.08.20 14:38:26]
WorkID: 118064747
Log Parcheo de certificado:
Contenido oculto (para miembros solamente)
Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J600G
Carrier ID: UFN
Sales Code: ARO
Country Code: Argentina
Timezone: America/Argentina/Buenos_Aires
Android Version: 10 [QP1A.190711.020] [SDK 29]
Build Date: Wed Oct 14 06:37:47 KST 2020
PDA Version: J600GUBU8CTJ2 [october 2020, rev2]
Phone Version: J600GDXU8CTI2 [september 2020, rev2]
CSC Version: J600GOWO8CTI2 [september 2020, rev2]
Board Platform: UNIVERSAL7870
Modem Platform: SHANNON315
Serial Number: R28K61KNE3M
Imei: 35XXXXXXXX
Network Type: GSM
SIM Status: ABSENT
Multisim Config: SS
Knox Version: v30
Warranty Bit: 1
Security Patch: 2020-09-01
Preparing...
Checking root access.
The phone is rooted by: 3.19:EFTSU
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [12.08.20 14:40:27]
WorkID: 118065347
