Offline
saludos a todos
Unlock A9 2018 Sm-A920F Bin 4 Claro Purto Rico SamkeyReader
Nota Si tiene Datos hacer backup Se borra todo Al activar el OEM
1-Activaremos la depuracion USB y OEM
2-activaremos *#0808# adm adb usb
Log
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM600]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-A920F
VER : A920FXXS4CTI5/A920FOWA4CTI5/A920FXXS4CTI5/A920FXXS4CTI5
IMEI : 353460100346112
S/N : R28KB2FCWJ
U/N : CE10182AC81BD87
Loading ADB module...............OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
Device Model : SM-A920F
ADB Serial Number : 2ac81bd8740d7ece
AP Ver : A920FXXS4CTI5
CP Ver : A920FXXS4CTI5
CSC Ver : A920FOWA4CTI5
Carrier : PCT
Android Ver : 10
RIL Type : Android 10 New SDK
Country : PUERTO RICO
Shipping : PCT
IMEI : 353zxczcxvcvzc46112
Debug Level : MID/LOW [0x4f4c]
Setting DEBUG level to HIGH...OK
Waiting for Reboot...OK
CP Debug Level : N/A [0x55ff]
Setting CP DEBUG mode..........OK
Waiting for Reboot...OK
Setting USB Settings to [diag,acm] automatically...OK
Searching for SAMSUNG Diagnostic Port...[COM601]...OK
QC SW Rev : MPSS.AT.3.1.c8-00069-SDM660_GEN_PACK-1.263251.1
Release : Sep 17 202018:17:22Feb 28 202013:00:00sdm660
Writing applet to device...OK
Starting RIL applet...OK
Checking DIAG security...[COM601]...OK
Launching CP CRASH...[ALG:5]...OK
Waiting for UPLOAD MODE...[COM14]...OK
Preparing to read data...OK
Reading RAM data...OK
Rebooting device to NORMAL mode...OK
Searching security HMAC...OK
Searching security key...SKIP
Switch Algorithm to : SamKEY Crypto Engine v1.1
Calculating MSM ID...OK
Calculating...[IDX:OK]...[KD1:OK]...OK
Validating security data...PASSED
Sending data to SERVER...OK
Waiting for SERVER response (may take few minutes)...OK
Sending codes to phone...[CD1:OK]...[CD2:OK]...OK
Operation successful.
Network code: 39415384
MCK code (PUK): 82726361
Espero les sea de utilidad
bendiciones a todos
Unlock A9 2018 Sm-A920F Bin 4 Claro Purto Rico SamkeyReader
Nota Si tiene Datos hacer backup Se borra todo Al activar el OEM
1-Activaremos la depuracion USB y OEM
2-activaremos *#0808# adm adb usb
Log
Searching for SAMSUNG Mobile USB Modem...OK
SAMSUNG USB Modem detected on [COM600]
Looking for DEVICE...OK
Reading USB MODEM information...OK
MODEL : SM-A920F
VER : A920FXXS4CTI5/A920FOWA4CTI5/A920FXXS4CTI5/A920FXXS4CTI5
IMEI : 353460100346112
S/N : R28KB2FCWJ
U/N : CE10182AC81BD87
Loading ADB module...............OK
Starting ADB module...OK
Searching for SAMSUNG ADB device...OK
Checking device authorization...OK
Reading ADB device information...
Device Model : SM-A920F
ADB Serial Number : 2ac81bd8740d7ece
AP Ver : A920FXXS4CTI5
CP Ver : A920FXXS4CTI5
CSC Ver : A920FOWA4CTI5
Carrier : PCT
Android Ver : 10
RIL Type : Android 10 New SDK
Country : PUERTO RICO
Shipping : PCT
IMEI : 353zxczcxvcvzc46112
Debug Level : MID/LOW [0x4f4c]
Setting DEBUG level to HIGH...OK
Waiting for Reboot...OK
CP Debug Level : N/A [0x55ff]
Setting CP DEBUG mode..........OK
Waiting for Reboot...OK
Setting USB Settings to [diag,acm] automatically...OK
Searching for SAMSUNG Diagnostic Port...[COM601]...OK
QC SW Rev : MPSS.AT.3.1.c8-00069-SDM660_GEN_PACK-1.263251.1
Release : Sep 17 202018:17:22Feb 28 202013:00:00sdm660
Writing applet to device...OK
Starting RIL applet...OK
Checking DIAG security...[COM601]...OK
Launching CP CRASH...[ALG:5]...OK
Waiting for UPLOAD MODE...[COM14]...OK
Preparing to read data...OK
Reading RAM data...OK
Rebooting device to NORMAL mode...OK
Searching security HMAC...OK
Searching security key...SKIP
Switch Algorithm to : SamKEY Crypto Engine v1.1
Calculating MSM ID...OK
Calculating...[IDX:OK]...[KD1:OK]...OK
Validating security data...PASSED
Sending data to SERVER...OK
Waiting for SERVER response (may take few minutes)...OK
Sending codes to phone...[CD1:OK]...[CD2:OK]...OK
Operation successful.
Network code: 39415384
MCK code (PUK): 82726361
Espero les sea de utilidad
bendiciones a todos
