en el modulo androidMTK seleccionamos el modelo ALCATEL OT-50440, damos direct unlock en flash mode y conectamos el telefono con vol+ presionado y dejamos que termine
Exe version: NCKDongle AndroidMTK 2.7.0
Selected model: Alcatel OT-5044O
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB Port (COM16)
Boot mode: Brom
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 150100464E58324D42
Error Load Custom Preloader.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
IMEI[1]: 353886081508751
IMEI[2]: 353886081508751
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[3260]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.
Hola amigos ami si me funciono hice el proceso como se indica y salio
Exe version: NCKDongle AndroidMTK 2.7.5
Selected model: Alcatel OT-5044O
Action: Unlock
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(9) : MediaTek USB Port (COM9)
[9] \\?\usb#vid_0e8d&pid_0003#5&bc8e042&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 150100464E58324D42
Error Load Custom Preloader.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x464e58324d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100464E58324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000 [7.290 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(23) : MediaTek DA USB VCOM (Android) (COM23)
[23] \\?\usb#vid_0e8d&pid_2001#5&21bbdc8f&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
IMEI[1]: 353886088086983
IMEI[2]: 0000000000000000
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[3260]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
[0]All done.
