Unlock Sagetel H353f

[servergsm]

Aqui les traigo el desbloqueo de este pequeño equipo , no encontre nada en internet y espero sea de su ayuda
para esto utilizaremos la NCK Dongle Modulo Android MTK

1- Abrimos la NCK AndroidMTK
2- Seleccionamos 0-By CPU y luego MT6572
3- En Metodo de coneccion elejimos Flash mode
4- Click en Direct Unlock y conectamos el equipo apagado

Esperamos que termine el proceso y listo

aqui el log

Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.8.7
Selected model: MT6572
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM26)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (28Gb+4096Mb) KSI 0x454534454134
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454534454134 : 00000000000000
EMMC UA SIZE: 0xe2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe2480000 [3.536 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM54)
IMEI[1]: 866253030077471
IMEI[2]: 354648020000251
Reading security, wait...
SIM[1]:
Block1(N): Unlocked (remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.


buenas tambien funciona de la siguiente manera :

1- Abrimos la NCK AndroidMTK
2- Seleccionamos 0-By CPU y luego MT6572_nand
3- En Método de conexión elegimos meta mode
4- Click en Direct Unlock y conectamos el equipo apagado.

Esta opción es para cuando la primera que posteo el colega le diga modelo no soportado

Selected connection metod: META Mode
Exe version: NCKBox AndroidMTK 1.8.8.7
Selected model: MT6572_NAND
Action: Unlock
Scanning for presents meta ports...
Phone must be off with battery inside.
Please insert USB cable now...
In some phones need to keep VOL- button untill inserting USB cable.
[19]Detected: MediaTek PreLoader USB VCOM (Android) (COM19)
\\?\usb#vid_0e8d&pid_2000#6&355609f4&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[259]META Port Detected: MediaTek USB VCOM (Android) (COM259)
USB\VID_0E8D&PID_2007\6&355609F4&0&2
Start sync target, waiting responce.....
[AP]BaseBand CPU : mt6572,S01
[META]BaseBand CPU : MT6572, E01
[META]SW_VER : MOLY.WR8.W1449.MD.WG.MP.V5.P7
[META]HW_VER : SR6572_WET_L_HSPA_HW
Phone imei[1] : 866253030066615
Phone imei[2] : 354648020000251
Start direct unlock[SIM1]
Direct unlock done
Start direct unlock[SIM2]
Direct unlock done
Clean Boot flag ok.
All done.