🔓Unlock/Liberar Unlock Samsung G950U AT&T bit 8 u8 bin8 Binary 8 binario 8 rev8 z3x

[servergsm]

Samsung G950U AT&T Unlock bit 8 u8 bin8 Binary 8 binario 8 rev8 z3x

Con bit 8 Probado OK G950U AT&T


UNLOCK INSTRUCTIONS:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Type *#0808# and select 'DM+ACM+ADB'.
3. Run dialer and type *#0*# (service mode will appear).
4. Connect the phone to USB cable, choose correct COM port in port settings.
5. Press 'Unlock' button.
6. Paste MSL code in new opened window and press 'OK'.

Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server',
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

Operation: Read Codes via Server
Selected model: SM-G950U
Software version: 43.27

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-G950U
Android version: 9
PDA version: G950USQU8DUA2
CSC version: G950UOYN8DUA2
Phone version: G950USQU8DUA2
Product code: SM2G950UZKAATT
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: ***********
IMEI: ***************
HW version: REV1.0
RF cal date: 2019.07.09
Chip name: MSM8998
Modem board: MSM8998
Security patch: 2020-12-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool... OK
Running zTool, please wait... OK
Trying to enable diag port... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Searching Samsung diag port... detected COM82
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM28 detected
Reading data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code: 90241795
NET lock: 25949082
SUB lock: 00000000
SP lock: 00000000
CP lock: 00000000
For check lock status: *#7465625#

Done with Samsung Tool PRO v.43.27 [SM-G950U,Read Codes via Server]​