Offline
Aqui les dejo el Unlock Del Vodafone Smart Firts 6 (VF695)
1.- Testeado es con el Modulo de NCK Android MTK 1.8.6.4
2.- Seleccionamos el Modelo Vodafone 695 y metodo Flash Mode
3.- Direct Unlock y Conectamos el Telf Apagado con Vol- apretado.
Aqui les Dejo el Log.
Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.6.4
Selected phone: Vodafone 695
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM23)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) MICRON 0x50314a39344d
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39 : 000000000000000000
EMMC UA SIZE: 0xe9800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9b00000 [3.651 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM138)
Block Size: 512
MODEL FROM PROINFO: V695-2BVDGB2
SECRO FROM PROINFO: X8I0HE00AZ10
IMEI marker was found in nvram
OTP ADRESS: 0xffff0200
OTP IMEI[1]: 357773069602218
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:9) Code : 06115302
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.
1.- Testeado es con el Modulo de NCK Android MTK 1.8.6.4
2.- Seleccionamos el Modelo Vodafone 695 y metodo Flash Mode
3.- Direct Unlock y Conectamos el Telf Apagado con Vol- apretado.
Aqui les Dejo el Log.
Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.6.4
Selected phone: Vodafone 695
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM23)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) MICRON 0x50314a39344d
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39 : 000000000000000000
EMMC UA SIZE: 0xe9800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9b00000 [3.651 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM138)
Block Size: 512
MODEL FROM PROINFO: V695-2BVDGB2
SECRO FROM PROINFO: X8I0HE00AZ10
IMEI marker was found in nvram
OTP ADRESS: 0xffff0200
OTP IMEI[1]: 357773069602218
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:9) Code : 06115302
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.
