Offline
en la new actualizacion de nck salio soportado este modelo (wiko jerry2)para estas funciones
- Read info/Write Firmware/Unlock Simlock/Backup & Restore Security/Wipe/Format Phone/Erase FRP.
solo conectar el telefono apagado en modo flash y direct unlock. listo en menos de un minuto.
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.8.7
Selected model: Jerry 2
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM58)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM59)
-Reading GPT Drive OK
IMEI[1]: 35xxxxxxxxxxxxx
IMEI[2]: 35xxxxxxxxxxxxx
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 87654321
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:5) Code : 87654321
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.
- Read info/Write Firmware/Unlock Simlock/Backup & Restore Security/Wipe/Format Phone/Erase FRP.
solo conectar el telefono apagado en modo flash y direct unlock. listo en menos de un minuto.
Selected connection metod: FLASH Mode
Exe version: NCKDongle AndroidMTK 2.5.8.7
Selected model: Jerry 2
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM58)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A483847346132 : 00000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM59)
-Reading GPT Drive OK
IMEI[1]: 35xxxxxxxxxxxxx
IMEI[2]: 35xxxxxxxxxxxxx
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:5) Code : 87654321
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:5) Code : 87654321
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
[0]Unlock finished.
[1]Unlock finished.
CHK updated ok.
Wait untill phone will start charging.
All done.
Debes estar registrado para ver imágenes adjuntar
