Unlock/Liberar Wiko A307as Unlock con nck

[servergsm]

Unlock Wiko A307as con nck

con nck ...

Exe version: NCKDongle AndroidMTK 2.7.5
Selected model: 0-By CPU MT6737M
Action: Unlock
Detected(189) : MediaTek USB VCOM (Android) (COM189)
USB\VID_0E8D&PID_200E&MI_01\6&C7C9F00&0&0001
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V114.5.P2
[META]HW_VER : TK_MD_L4_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 352...................................
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
[0]All done.

 

[christianj31]

Buenas tardes, la nueva actualización de este equipo no permite la liberación por NCK, por lo que se debe hacer con GLOBAL UNLOCKER, cobra 4 creditos, adjunto el LOG.
Global Unlocker Tool 4.0.1.2
Unlock Service
- Connecting ... [ 75KN4L4LSWOZG6ZP ]
- Manufacturer: WIKO
- Model: U307AS
- IMEI: 356818681749**
- Carrier ID: 823
- Security Patch: 2021-03-05
- Software: MOLY.LR12A.R3.MP.V114.5.P2
- Android Version: 9
- Hardware: mt6739
- SELinux: Enforcing
- SIM: Unknown
- USB Config: mtp,adb
- Check Device Server Info : OK
- This Operation Will Take 4 Credits
- Prepair Device : OK
- Initialize Device : OK
- Read Simlock Security : OK
- Calculate Simlock Blob : OK
- Wait For Server : OK
- Unlock : OK
# You Should Reboot Device Manually
# Elapsed Time [00:13]

 

[apmovil]

Exe version: NCKBox AndroidMTK 2.9.9
Selected model: 0-By CPU MT6739
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(10) : MediaTek USB Port (COM10)
[10] \\?\usb#vid_0e8d&pid_0003#5&1dd4cf36&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[11]META Port Detected: MediaTek USB VCOM (Android) (COM11)
USB\VID_0E8D&PID_200E&MI_01\6&372473C2&0&0001
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V114.5.P2
[META]HW_VER : TK_MD_L4_HW
Meta mode conected ok, start reading phone....
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 352385xxxxxxxxxxx
Getting simlock handle, please wait...

[104]Simlock Info : Sim [1]

Block1[N] :UnLocked [remain: 5]
Block2[NS] :Unlocked
Block3[SP] :Unlocked
Block4[C] :Unlocked
Block5[SIM]:Unlocked
**************************************
Error start AP mode.
[0]All done.

No funciona en Cuba

 

[John Wick]

Exe version: NCKBox AndroidMTK 2.9.9
Selected model: 0-By CPU MT6739
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(10) : MediaTek USB Port (COM10)
[10] \\?\usb#vid_0e8d&pid_0003#5&1dd4cf36&0&7#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[11]META Port Detected: MediaTek USB VCOM (Android) (COM11)
USB\VID_0E8D&PID_200E&MI_01\6&372473C2&0&0001
Start sync target, waiting responce.....
ChipID: MT6739
[MT6739]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6739
[META]SW_VER : MOLY.LR12A.R3.MP.V114.5.P2
[META]HW_VER : TK_MD_L4_HW
Meta mode conected ok, start reading phone....
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 352385xxxxxxxxxxx
Getting simlock handle, please wait...

[104]Simlock Info : Sim [1]

Block1[N] :UnLocked [remain: 5]
Block2[NS] :Unlocked
Block3[SP] :Unlocked
Block4[C] :Unlocked
Block5[SIM]:Unlocked
**************************************
Error start AP mode.
[0]All done.

No funciona en Cuba

Intenta usar la misma version que uso el compañero del post original y o actualiza a la ultima version tu nck la cual es la 3.xxx y comenta resultados porfavor. Los instaladores los encuentas con el modulo Nck main y ahi estan todas las versiones....

 

[apmovil]

Intenta usar la misma version que uso el compañero del post original y o actualiza a la ultima version tu nck la cual es la 3.xxx y comenta resultados porfavor. Los instaladores los encuentas con el modulo Nck main y ahi estan todas las versiones....

Tendria que pedir me lo traigan nuevamente mañana testeo y comento

 

[apmovil]

Unlock Service
- Connecting ... [ ONSSVWPF45CMFQR8 ]
- Manufacturer: WIKO
- Model: U307AS
- IMEI: 3523851xxxxxxxxx
- Carrier ID: 823
- Security Patch: 2021-02-05
- Software: MOLY.LR12A.R3.MP.V114.5.P2
- Android Version: 9
- Hardware: mt6739
- SELinux: Enforcing
- SIM: Unknown
- USB Config: mtp,adb
- Check Device Server Info : OK
- This Operation Will Take 4 Credits
- Prepair Device : OK
- Initialize Device : OK
- Read Simlock Security : OK
- Calculate Simlock Blob : OK
- Wait For Server : OK
- Unlock : OK
# You Should Reboot Device Manually
# Elapsed Time [00:15]
# Operation ID : 1683885

AL parecer no funciona en Cuba