Online
procesador MTK Helio p60 8 núcleos 2.0G
abrimos modulo OTSmart_v1.0.0.5195_SEC_Edition de PACK 6
seleccionamos el modelo ZTE V Smart
ponemos el imei nuevo damos en conect y conectamos apagado el teléfono
y listo queda en pocos minutos aqui el log... sin creditos
Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5195
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM8)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM8
Connecting;
Downloading DA;
Initializing;
Rid: 0b0c28425cfc03fb9a9bfdfb90622be2
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6771 [CA00, 00, 6771, 00]
HW_STORAGE_EMMC: 0x44000145 0x32313441 0x461D0138 0x81C64064 [SIZE=0x1D20400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x17D800000 SIZE: 0x1B9D8F8000
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder
Searching data;
Checking data;
NVRAM integrity check passed;
Formatting NVDATA partition now...
Done;
IMEI repaired; Remove battery and cable;
Time needed - 00:00:07
abrimos modulo OTSmart_v1.0.0.5195_SEC_Edition de PACK 6
seleccionamos el modelo ZTE V Smart
ponemos el imei nuevo damos en conect y conectamos apagado el teléfono
y listo queda en pocos minutos aqui el log... sin creditos
Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5195
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM8)) (Driver version: 3.2.0.0)
Preparing to start flash mode;
Preparing to open COM8
Connecting;
Downloading DA;
Initializing;
Rid: 0b0c28425cfc03fb9a9bfdfb90622be2
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6771 [CA00, 00, 6771, 00]
HW_STORAGE_EMMC: 0x44000145 0x32313441 0x461D0138 0x81C64064 [SIZE=0x1D20400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x17D800000 SIZE: 0x1B9D8F8000
SPECIAL NOTE: If you are using windows 10 x64 be sure that the installed mtk driver version is 3.0.1504.0 . Any different drivers will create random read bugs on newer chipset phones.
As usual the correct drivers come inside OTSMart archive inside the "usb_driver" folder
Searching data;
Checking data;
NVRAM integrity check passed;
Formatting NVDATA partition now...
Done;
IMEI repaired; Remove battery and cable;
Time needed - 00:00:07
