FLASHING MI NOTE 8 PRO REDMI 6 REDMI 6A NO AUTH WITH FLASHTOOL (mtk)
usage guide
trust the process {if you have doubts ignore them}
1.firstly install python-3.9.1-amd64
(install for all user) & (add python 3.9 to path)
2. Run cmd {command prompt}
copy paste and enter the command "python -m pip install pyusb pyserial json5"
a).ensure an active internet connection
i.collecting pyusb ii.pyserial iii.json5
ensure all 3.py's are downloaded.
b). go to the folder BYPASS_AUTHORIZED_XIAOMI_FREE and open driver folder
and install cdc-acm (.inf) wait until you see operation completed successfully.
3.install libusb-win32-devel-filter-1.2.6.0.exe
Launch it, a libusb win32 filter installer should pop up
with 3 options, select "install a device filter".
a). At Device Selection
your with see avalaible HardWare ID
b). ensure your device is powered off
press and hold the volume + button and insert usb cord
c). connect device hardware id will be added to list
select your device id and install
Your should get a pop up saying "libusb-win32 device filter successfully installed for MTk Usb Port."
after you get this message eject usb card.
4.Open the BYPASS_AUTHORIZED_XIAOMI_FREE folder
open bypass folder
and run brom.
you will get a message saying waiting for bootrom {cmd window}
once again press and hold volume + and insert USB cord.
after all is done close command prompt.
5. Head over to Sp flash tool
select options
connection
select UART
select your connect device COM port (check device manager) [MEDIATEK
change BAUD rate to 921600
now find your downloaded firmware and select scatter file
b. Flashing will begin Momentarily.
************************************************** ************************************************** *
addition file in folder.
i. REDMI6_REDMI6A_MIACCOUNT_FRP remove file
open and flash scatter with sp flash tool
to remove Miaccount and Unlock Frp lock.
___________________________________
ii. mtk USB DRIVER AUTO INSTALLER
________________________________
ITEM NOT INCLUDED IN ARCHIVE
redmi firmware
download your device flash file from the internet.
FULLY TESTED WITH REDMI 6A
by snooks4tech
usage guide
trust the process {if you have doubts ignore them}
1.firstly install python-3.9.1-amd64
(install for all user) & (add python 3.9 to path)
2. Run cmd {command prompt}
copy paste and enter the command "python -m pip install pyusb pyserial json5"
a).ensure an active internet connection
i.collecting pyusb ii.pyserial iii.json5
ensure all 3.py's are downloaded.
b). go to the folder BYPASS_AUTHORIZED_XIAOMI_FREE and open driver folder
and install cdc-acm (.inf) wait until you see operation completed successfully.
3.install libusb-win32-devel-filter-1.2.6.0.exe
Launch it, a libusb win32 filter installer should pop up
with 3 options, select "install a device filter".
a). At Device Selection
your with see avalaible HardWare ID
b). ensure your device is powered off
press and hold the volume + button and insert usb cord
c). connect device hardware id will be added to list
select your device id and install
Your should get a pop up saying "libusb-win32 device filter successfully installed for MTk Usb Port."
after you get this message eject usb card.
4.Open the BYPASS_AUTHORIZED_XIAOMI_FREE folder
open bypass folder
and run brom.
you will get a message saying waiting for bootrom {cmd window}
once again press and hold volume + and insert USB cord.
after all is done close command prompt.
5. Head over to Sp flash tool
select options
connection
select UART
select your connect device COM port (check device manager) [MEDIATEK
change BAUD rate to 921600
now find your downloaded firmware and select scatter file
b. Flashing will begin Momentarily.
************************************************** ************************************************** *
addition file in folder.
i. REDMI6_REDMI6A_MIACCOUNT_FRP remove file
open and flash scatter with sp flash tool
to remove Miaccount and Unlock Frp lock.
___________________________________
ii. mtk USB DRIVER AUTO INSTALLER
________________________________
ITEM NOT INCLUDED IN ARCHIVE
redmi firmware
download your device flash file from the internet.
FULLY TESTED WITH REDMI 6A
by snooks4tech
