Offline
Estado: BLU que llegó con el sistema operativo inconsistente totalmente, a veces se quedaba en el LOGO, no mostraba indicador de carga aunque se encontraba cargando, de eso me pude dar cuenta cuando terminó el trabajo. A veces entraba y muchas aplicaciones se detenían.
1- Lo primero es realizar una lectura para saber los datos exactos del dispositivo. Conectar con el dispositivo apagado.
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.0.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM28)
Build ID: KOT49H
Display ID: ALPS.KK1.MP7.V1
Version: 4.4.2
Model: BLU STUDIO 5.0 C
Brand: BLU
Device: BLU STUDIO 5_0 C
Manufacturer: BLU
Region: US
Mediatek Version Release: ALPS.KK1.MP7.V1
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Wait untill phone will start charging.
[0]All done.
2- Lo segundo es realizar un Backup del área de seguridad, por si lo necesitásemos en algún momento. Conectar con el dispositivo apagado.
Exe version: NCKDongle AndroidMTK 2.6.0.0
Selected phone: MT6572
Action: Backup security items
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM28)
Build ID: KOT49H
Display ID: ALPS.KK1.MP7.V1
Version: 4.4.2
Model: BLU STUDIO 5.0 C
Brand: BLU
Device: BLU STUDIO 5.0 C
Manufacturer: BLU
Region: US
Mediatek Version Release: ALPS.KK1.MP7.V1
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Dumping security....
Dumping Preloader.
Reading nvram
Dumping SEC_RO
Reading: BEGIN: 0x3580000 - LEN: 0x40000
Saved to : XXX
Wait untill phone will start charging.
[0]All done.
3- Lo tercero es realizar FLASHEO, formateando pero sin escribir el PRELOADER. Conectar con el teléfono apagado.
Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: MT6572
Exe version: NCKDongle AndroidMTK 2.6.0.0
Scenario: [2]Flash Skip Preloader
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A483447326111 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM28)
Preloader backup already exist, skip saving.
[2]FORMAT - BEGIN: 0x44740000 - LEN: 0xe200000
[2]FORMAT - BEGIN: 0x52940000 - LEN: 0x95dc0000
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Wait untill phone will start charging.
[0]All done.
4- Entrar y cuando se esté dentro realizar un WIPE RESET a todo el dispositivo para eliminar cualquier remanente.
1- Lo primero es realizar una lectura para saber los datos exactos del dispositivo. Conectar con el dispositivo apagado.
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.6.0.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM28)
Build ID: KOT49H
Display ID: ALPS.KK1.MP7.V1
Version: 4.4.2
Model: BLU STUDIO 5.0 C
Brand: BLU
Device: BLU STUDIO 5_0 C
Manufacturer: BLU
Region: US
Mediatek Version Release: ALPS.KK1.MP7.V1
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Wait untill phone will start charging.
[0]All done.
2- Lo segundo es realizar un Backup del área de seguridad, por si lo necesitásemos en algún momento. Conectar con el dispositivo apagado.
Exe version: NCKDongle AndroidMTK 2.6.0.0
Selected phone: MT6572
Action: Backup security items
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A483447316404 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM28)
Build ID: KOT49H
Display ID: ALPS.KK1.MP7.V1
Version: 4.4.2
Model: BLU STUDIO 5.0 C
Brand: BLU
Device: BLU STUDIO 5.0 C
Manufacturer: BLU
Region: US
Mediatek Version Release: ALPS.KK1.MP7.V1
IMEI[1]: XXXXXXXXXXXXXXX
IMEI[2]: XXXXXXXXXXXXXXX
Dumping security....
Dumping Preloader.
Reading nvram
Dumping SEC_RO
Reading: BEGIN: 0x3580000 - LEN: 0x40000
Saved to : XXX
Wait untill phone will start charging.
[0]All done.
3- Lo tercero es realizar FLASHEO, formateando pero sin escribir el PRELOADER. Conectar con el teléfono apagado.
Flash files count is :12
Action : Firmware update.
Selected Model: 0-By CPU: MT6572
Exe version: NCKDongle AndroidMTK 2.6.0.0
Scenario: [2]Flash Skip Preloader
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM30)
Boot mode: Preloader
BBCHIP: 6572 0 ca00
Using Algo 1.
Scatter file loaded, not need emmi.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6572
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447326111
EMMC FW VERSION: 02:00:00:00:00:00:00:00
EMMC CID: 90014A483447326111 : 00000000000000
EMMC UA SIZE: 0xe9000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000 [3.652 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM28)
Preloader backup already exist, skip saving.
[2]FORMAT - BEGIN: 0x44740000 - LEN: 0xe200000
[2]FORMAT - BEGIN: 0x52940000 - LEN: 0x95dc0000
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Starting flash.
Wait untill phone will start charging.
[0]All done.
4- Entrar y cuando se esté dentro realizar un WIPE RESET a todo el dispositivo para eliminar cualquier remanente.
