Online
no se si fue suerte o que pero me funciono este metodo "modulo mtk de sigmakey , conectas sin batería , conectas bateria presionas unos 5 segundos volumen - , y te creará un puerto mtk , congelando la pantalla a su vez , seleccionas el puerto que generó y le das Unlock directo después de varios métodos así pude liberarlo"
aqui esta el logo
SigmaKey v.2.19.00
1600XXXXX Sigma dongle 2.19, Initializing...OK
Pack 1: Not activated
Pack 2: Not activated
--------- 2017-01-01 13:02:22 ---------
SigmaKey 2.19.00 MTK: Direct unlock
MediaTek USB VCOM (Android) (COM131), Provider: MediaTek Inc., Driver ver.: 2.0.1136.0, Date: 31/08/2011, USB\VID_0BB4&PID_0005&REV_0216&MI_02
Baseband Processor: MT6572, E01
Version: JRDHZ72_W_72_PX_KK_HSPA_HW
Firmware: MOLY.WR8.W1315.MD.WG.MP.V36.P9
IMEI 1: 0145130017XXXXX
IMEI 2: 000000000000000
Performing heuristic analysis (stage 34 of 127)...5D411643
Security area saved to "C:\Users\INCOGNITO\Documents\SigmaKey\security backup145130017XXXXX_MT6572, E01 JRDHZ72_W_72_PX_KK_HSPA_HW MOLY_WR8_W1315_MD_WG_MP_V36_P9.skb"
If phone remains locked, please try Yoda method (via ADB mode).
Unlocking phone...Done
Restarting phone...Done
otra forma
Con Infinity sale sin tantas complicaciones y sin necesidad de root.
Operation : SP Unlock [ v1.58 ]
Mode : Direct Unlock
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 38 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A323541420292389ABD9279
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BA52J
[eMMC] : FLASH_CID : 150100464A323541420292389ABD9279
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xA3362F5945898333FC45567EA35B6227
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
SIM Lock Status : Locked!
Unlocking now ...
Unlock done!
Done!
Elapsed: 00:00:26
Reconnect Power/Cable!
aqui esta el logo
SigmaKey v.2.19.00
1600XXXXX Sigma dongle 2.19, Initializing...OK
Pack 1: Not activated
Pack 2: Not activated
--------- 2017-01-01 13:02:22 ---------
SigmaKey 2.19.00 MTK: Direct unlock
MediaTek USB VCOM (Android) (COM131), Provider: MediaTek Inc., Driver ver.: 2.0.1136.0, Date: 31/08/2011, USB\VID_0BB4&PID_0005&REV_0216&MI_02
Baseband Processor: MT6572, E01
Version: JRDHZ72_W_72_PX_KK_HSPA_HW
Firmware: MOLY.WR8.W1315.MD.WG.MP.V36.P9
IMEI 1: 0145130017XXXXX
IMEI 2: 000000000000000
Performing heuristic analysis (stage 34 of 127)...5D411643
Security area saved to "C:\Users\INCOGNITO\Documents\SigmaKey\security backup145130017XXXXX_MT6572, E01 JRDHZ72_W_72_PX_KK_HSPA_HW MOLY_WR8_W1315_MD_WG_MP_V36_P9.skb"
If phone remains locked, please try Yoda method (via ADB mode).
Unlocking phone...Done
Restarting phone...Done
otra forma
Con Infinity sale sin tantas complicaciones y sin necesidad de root.
Operation : SP Unlock [ v1.58 ]
Mode : Direct Unlock
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 38 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464A323541420292389ABD9279
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BA52J
[eMMC] : FLASH_CID : 150100464A323541420292389ABD9279
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID : 0xA3362F5945898333FC45567EA35B6227
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
SIM Lock Status : Locked!
Unlocking now ...
Unlock done!
Done!
Elapsed: 00:00:26
Reconnect Power/Cable!
