🔓Unlock/Liberar Alcatel 5026a unlock liberar con nck (1 Viewer)

[servergsm]

OG de operación con NCK

Exe version: NCKBox AndroidMTK 2.6
Selected model: Alcatel OT-5026
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB VCOM (Android) (COM52)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 700100454841454538
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (114Gb+8192Mb) KSI 0x454841454538
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454841454538 : 00000000000000
EMMC UA SIZE: 0x390000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x390c00000 [14.262 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM5)
Phone have OTP partition.
MODEL FROM PROINFO: 5026A-2DTLMX1
SECRO FROM PROINFO: X4F0NB01BZ00
OTP IMEI: 01508**********
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:10)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[4700]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
Wait untill phone will start charging.
[0]All done.

 

[merida100]

OG de operación con NCK

Exe version: NCKBox AndroidMTK 2.6
Selected model: Alcatel OT-5026
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek USB VCOM (Android) (COM52)
Boot mode: Brom
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
[emmi]EMMC CID: 700100454841454538
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : 05
BaseBand CPU Bootloader Version : FE
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (114Gb+8192Mb) KSI 0x454841454538
EMMC FW VERSION: 01:00:00:00:00:00:00:00
EMMC CID: 700100454841454538 : 00000000000000
EMMC UA SIZE: 0x390000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x390c00000 [14.262 GB]
Status: USB_FULL_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM5)
Phone have OTP partition.
MODEL FROM PROINFO: 5026A-2DTLMX1
SECRO FROM PROINFO: X4F0NB01BZ00
OTP IMEI: 01508**********
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
SIM[2]:
Block1(N): Locked (remain:10)
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
[4700]Unlocking target...please wait
[0]Unlock finished.
[1]Unlock finished.
Wait untill phone will start charging.
[0]All done.

Qué tal amigo, me podrías apoyar no puedo hacer la liberación no me aparece el modelo en el nck

 

[servergsm]

depende de la version de nck que tengas