1- activar modo desarollador
2.- activar OEM
3.- activar depuracion USB
4.- apagar el equipo y conectar con volumen menos (modo download)
seleccionar el modelo como en la imagen
con 100 creditos esperar y listo
cobrar bien
Selected USB connection type
Work ID: 00000000001CDC99
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 921600
Selected model: K300MM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM47
Mode: Emergency
Initializing flash...OK
Model ID: LM-K300MM
Platform: mt6765
Android version: 10
SW version: LMK300MMAT-02-V10c-310-160-JUL-08-2020-ARB00+0
LAF Version: 1.1
Product ID: LS02S200921003625
IMEI: 354855-11-191544-2
Target operator: LAO
Hardware: rev_10
Battery level: 63%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 354855-11-191544-2
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "K300MM_354855111915442_28-10-2020_16-08-12.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: amagapasa94
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.5.07 Software version
Debes estar registrado para ver enlaces
cccc
1- activar modo desarollador
2.- activar OEM
3.- activar depuracion USB
4.- apagar el equipo y conectar con volumen menos (modo download)
seleccionar el modelo como en la imagen
con 100 creditos esperar y listo
cobrar bien
Selected USB connection type
Work ID: 00000000001CDC99
Checking data...OK
Platform: LG MTK
Selected port: COM1
Selected baudrate: 921600
Selected model: K300MM
Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
Phone found at port COM47
Mode: Emergency
Initializing flash...OK
Model ID: LM-K300MM
Platform: mt6765
Android version: 10
SW version: LMK300MMAT-02-V10c-310-160-JUL-08-2020-ARB00+0
LAF Version: 1.1
Product ID: LS02S200921003625
IMEI: 354855-11-191544-2
Target operator: LAO
Hardware: rev_10
Battery level: 63%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 354855-11-191544-2
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.
Continue?
Creating EEPROM backup...OK
Initializing flash...OK
Reading security area...
Backup saved to "K300MM_354855111915442_28-10-2020_16-08-12.EEP"
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: amagapasa94
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!
Performed by 3.0.5.07 Software version
