Offline
1. Con box Furious en OTSmart V1.0.0.1544
2. Seleccionar modelo ZTE B816 Boost .
3. Marcar casilla FRP Reset.
4. Conectar equipo apagado y esperar a que haga el proceso, reiniciar y ya sin cuenta.
Aqui el log de operacion;
Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM50))
Preparing to start flash mode;
Preparing to open COM50
Connecting;
Downloading DA;
Initializing;
Rid: a367d4d3c5a2f88f818295d4b44cbd20
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;
Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;
DA_HIGHSPEED_VCOM (@oem251.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM46;
DEVICE INFO:
BB CHIP: MT6735M_S00 [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0xD2540705 0xC17358A8 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-80-000000-0
PROVIDER: N/A
USRDATA INFO: 0x99000000 SIZE: 0x39C00000
Factory Reset Protection successfully removed !
Time needed - 00:00:00
Log file saved to: LOG_25_04_2017_13_24_05.txt
otfa forma
Que tal amigos yo lo resolvi con NCK con el modulo android MTK
Abren el programa y se van directo a la pestaña SERVICE
seleccionan RESET FRP cuando les pida conectan el celular apagado y en segundos esta listo
dejo el log espero les sirva
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM196)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x6a00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
2. Seleccionar modelo ZTE B816 Boost .
3. Marcar casilla FRP Reset.
4. Conectar equipo apagado y esperar a que haga el proceso, reiniciar y ya sin cuenta.
Aqui el log de operacion;
Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM50))
Preparing to start flash mode;
Preparing to open COM50
Connecting;
Downloading DA;
Initializing;
Rid: a367d4d3c5a2f88f818295d4b44cbd20
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;
Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;
DA_HIGHSPEED_VCOM (@oem251.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM46;
DEVICE INFO:
BB CHIP: MT6735M_S00 [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0xD2540705 0xC17358A8 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-80-000000-0
PROVIDER: N/A
USRDATA INFO: 0x99000000 SIZE: 0x39C00000
Factory Reset Protection successfully removed !
Time needed - 00:00:00
Log file saved to: LOG_25_04_2017_13_24_05.txt
otfa forma
Que tal amigos yo lo resolvi con NCK con el modulo android MTK
Abren el programa y se van directo a la pestaña SERVICE
seleccionan RESET FRP cuando les pida conectan el celular apagado y en segundos esta listo
dejo el log espero les sirva
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM196)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x6a00000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
