Offline
aqui traigo el frp del blu studio view s810p
Boot Info
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: NRD90M
Version: 7.0
Build Date: Tue Dec 11 22:13:28 CST 2018
Build Date: 1544537608
Model: Studio View
Brand: BLU
Manufacturer: BLU
Display ID: BLU_S810P_V7.0.04.05_GENERIC
Device: S810P
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp2-V1_wtk6580.we.n
This phone have FRP partition.
IMEI[1]: 355301090103741
IMEI[2]: 355301090306740
Read done.
Wait untill phone will start charging.
All done.
no seleccione ni cpu, con el que viene por defecto salio a la primera
FRP RESET
Exe version: NCKBox AndroidMTK 1.8.9.7
Selected model: 0-By CPU ELBRUS
[erase]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...
Erasing FRP, wait...
[2]FORMAT - BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
Boot Info
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKBox AndroidMTK 1.8.9.7
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM10)
Build ID: NRD90M
Version: 7.0
Build Date: Tue Dec 11 22:13:28 CST 2018
Build Date: 1544537608
Model: Studio View
Brand: BLU
Manufacturer: BLU
Display ID: BLU_S810P_V7.0.04.05_GENERIC
Device: S810P
FRP partition: /dev/block/platform/mtk-msdc.0/11120000.msdc0/by-name/frp
Mediatek Version Release: alps-mp-n0.mp2-V1_wtk6580.we.n
This phone have FRP partition.
IMEI[1]: 355301090103741
IMEI[2]: 355301090306740
Read done.
Wait untill phone will start charging.
All done.
no seleccione ni cpu, con el que viene por defecto salio a la primera
FRP RESET
Exe version: NCKBox AndroidMTK 1.8.9.7
Selected model: 0-By CPU ELBRUS
[erase]Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM9)
Boot mode: Preloader
BBCHIP: 6580 0 ca00
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464536324d42
EMMC FW VERSION: 03:00:00:00:00:00:00:00
EMMC CID: 150100464536324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000 [14.572 GB]
Checking data, wait...
Erasing FRP, wait...
[2]FORMAT - BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
