Offline
Aquí les dejo procedimiento para eliminar la cuenta de gmail por medio de nckbox. A este equipo tmovi infinit 2.
solo es necesario abrir programa nckbox AndroidMTK en la versión mas actual y seleccionar O-by CPU y MT6580.
Ir a pestaña de servicio y seleccionar reset frp.
El modo de conectar el equipo es el siguiente. Conectamos cable usb a compu. Sin batería el equipo conectamos
el cable USB y enseguida insertamos batería y comenzara a realizar trabajo. aquí dejo imagen de proceso.
Exe version: NCKDongle AndroidMTK 2.5.7.0
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SANDISK 0x445331303038
EMMC FW VERSION: 30:30:36:30:33:33:00:00
EMMC CID: 45010044533130 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM58)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.
solo es necesario abrir programa nckbox AndroidMTK en la versión mas actual y seleccionar O-by CPU y MT6580.
Ir a pestaña de servicio y seleccionar reset frp.
El modo de conectar el equipo es el siguiente. Conectamos cable usb a compu. Sin batería el equipo conectamos
el cable USB y enseguida insertamos batería y comenzara a realizar trabajo. aquí dejo imagen de proceso.
Exe version: NCKDongle AndroidMTK 2.5.7.0
Selected model: MT6580
Action: Reset FRP
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SANDISK 0x445331303038
EMMC FW VERSION: 30:30:36:30:33:33:00:00
EMMC CID: 45010044533130 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM58)
Checking data....wait!
FORMAT EMMC FLASH : BEGIN: 0x4fa0000 - LEN: 0x100000
FRP Reset Done.
Wait untill phone will start charging.
All done.