Offline
la solucion es cargar una combinacion, y luego reset msl en la misma combinacion cargar el cert y luego firmware original
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Write CERT
Selected model: SM-J500M
Selected port: COM30 SAMSUNG Mobile USB Serial Port
Software version: 29.5
Checking CERT file... OK
KEY ID: 0338
Waiting ADB device... OK
Reading phone info...
Model: SM-J500M
Android version: 5.1.1
Product code: SM-J500MZWAZTO
Phone...
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Write CERT
Selected model: SM-J500M
Selected port: COM30 SAMSUNG Mobile USB Serial Port
Software version: 29.5
Checking CERT file... OK
KEY ID: 0338
Waiting ADB device... OK
Reading phone info...
Model: SM-J500M
Android version: 5.1.1
Product code: SM-J500MZWAZTO
Phone...
